Conversations
Conversations 1 - 20 of 33
This morning almost all of my AP "detects radar burst on radio..." causing really bad throughput on my network. This has been going on fo...
To cloud or not to cloud the Zone Director?
Our ZD1100 and Aps are end of life. We are evaluating the refresh routes. The question we have is what are the pros and cons of using a v...
Zone Director 1200 upgrade
Dears I am asking about the firmware upgrade,do i have to upgrade according to path i.e version by version or i can just download the lat...
Apple device's WiFi problems (unstable)
Hello, We got around 375 clients on our 40 APs (R700) where there are 47 Mac's (Pro and Air) & 67 iOS Devices who are having huge wifi p...
Is it possible to controll all AP's after a wireless bridge with zonedirector?
Is it possible to control all Ruckus AP'S after a bridge with the all feaure of Zone director? Here is the configuration
Idle ZD1100. Is it worth it to get a license and use it?
So I have six 6-600 APs running in unleashed mode and so far very happy with the performance. I have them in a small 44 unit hotel, and s...
Reporting on Zone director
Hello, Can anyone help me on reporting feature on Zone director. We want to save connected client report for one month. Thanks in advanc...
TP-Link TL-WR902AC in Client mode not connecting to SZ100 R500 APs
Hi, we want to use a TP-Link TL-WR902AC Wireless Travel Router setup in Client-Mode connecting to our Ruckus WiFi Infrastruktur (SZ100 wi...
need OID für Memory Utilization of ZoneDirector 1200
Hello, I try to Monitor the ZD und AP's with Nagios. All I'm missing is the zonedirector's memory load/usage. With OID 1.3.6.6.1.4.1.2505...
Severe flaw in WPA2 - cracked
when can we expect to see update for this https://arstechnica.com/information-technology/2017/10/severe-flaw-in-wpa2-protocol-leaves-wi-f...
T301N on a zone director
I am running 8 -T301n ap's on a zone director 3025, but when i get 20 users on them the CPU in the unit shows it is running at 100% and t...
Need OID for number of clients connected to one AP
I am using a third party software application which provides a way for SNMP polling to return the number of clients associated with each ...
Connectivity Issues on ZoneFlex r300 series not sure what else to do
Recently we started having issues with 1 access point in particular. We have 3 sites with around 35 access points total. At the site I'...
Guest access not working after 9.7 upgrade
After my upgrade to 9.7 Guess pass/ Guess access no longer works. When connecting to the guest SSID it connects but the authentication w...
Recommend small switch for R710 APs PoE+ 802.3at ?
I've been doing many web searches for a small PoE+ switch that is known to work well with the R710, but it seems like all I can find is s...
Multiple PoE Ports for HA
We would like to have failover power to our R500 AP's (ideally provided through a second PoE port as currently the second port is non-PoE...
WiFi Strength Signal
Can you explain why minimum recommended signal test for best use is -65 dbm? what if it goes to -72 dbm?
ruckus without zone director
I am about to purchase a few ruckus aps. I was wondering if anyone has experience with using flexmaster with multiple aps and without zon...
ZD1200 - iPad Air / iphones must forget network in order to reconnect.
Hi all, new to Ruckus and I've got a problem that has me stumped... I have a Zone Director 1200 with 2 R700 AP's that i am using to stre...
How do I stop Guest Pass page from pre-populating the phone number field?
The Guest Access page uses a phone number field that for some reason gets pre-populated. We want to have the field be blank for new gues...