Conversations
Is there any way to steer client devices toward using the 5ghz band rather than not offering 2.4 on the access point? Almost all of the ...
Upgrading standalone 2942 AP from 9.6.1.0.15 to 9.7.0.0.220 makes only troubles for us.
I have 2x 2942 standalone AP's. After upgrade b...
I am installing 65 AP's with a ZD3050. I work for an ISP and we are giving a 50meg fiber connection to the site for Bandwidth. This is a ...
Not to hijack, but I have a ZD3100 and 51 2942 APs...and upgraded to 9.7.
Same symptom, connected clients became disconnected client...
ZF7982 Noob observations:
1. Mounting template (paper diagram provided) should include all 4 mounting points, not just the two prime o...
I've got three APs, each broadcasting 2 SSID's. When a user selects one WLAN, they get an address on network A. When a user slects the ot...
Hello All—
I am Chris and I am an engineer that works for a construction firm. We are located in a remote area and do not have access...
ZF7321 is single band selectable. Single band only meshes with other single band APs.
Can someone confirm that when 2.4GHZ is selected...
How about the default time for email sent out of AP lost contact notification? can i change default time setting? when AP lost connect to...
Hello;
I have some inquires after using ZP firs time:
1 - What is the optimum RSSI level 'Indoor' with a reasonable data rate f...
Hello we have installed 4 stand alone 7352 AP's without a Zone Director. Is there a way we can change the WPA2 password other than connec...