ICX6610 invalid input when trying to creating ve interface
I'm getting the error invalid input when trying to create ve interface. Is there any changes in command for creating this ve interface? o...
David Ellis
Joined on February 20, 2018
2
Likes received
0
Conversations posted
20
Replies posted
11
Conversations followed
Conversations
ICX 7150 - dumb switch default password
I've installed a couple of Ruckus ICX 7150 switches with no configuration and I would like to configure them remotely but when I ssh in, ...
ICX port blocking
I've got a 7750 as my core router and 1GB connections to 9 sites with 7450 routers. 7 of the connections work and 2 do not. As far as...
Setting Router/Switch Code On Primary and Secondary
I have a VAR who setup an ICX-7450 and I'm interested in what the best practice is. He put router code on the primary and switch code on ...
How to auto-provision Brocade switches by DHCP
Going through the documentation (which is pretty shoddy) I can't seem to figure this out. My best guess, from what I've read, is:
Unzip f...
ICX7450 switch STP Loop
We have ICX 7450 switch as distribution switch and below that we have 5 nos HP 5120 as access switches in a Ring Topology. We have conne...
How can I upgrade ICX 7150 by Uboot?
Data and Voice Vlan
I have a two windows 2016 dhcp server One for voice (172.16.0.0/24) and one for data (10.10.8.0/21) vlan. Phone and a PC on the same por...
ICX 7150 to Ruckus ZD1200 w/H510 WAP
hello Newbie question. I am trying to connect a ZD1200 via an ICX 7150 switch to H510 APs. vlan 1 is native /Vlan 20 public ssid /Vlan 3...
Mac based VLAN - Howto convert config ?
Hi, we are using MAC based vlan for a long time. We have a running config for FCX running 7.X code. Starting with 8.0.20(30) the syntax o...
ICX 7450 stack with ~100 access switches connected and ~250 VLANs
Hello to All, I'm going to design and deploy network infrastructure in huge building based on Brocade ICX switches and other vendor switc...