T300 Connectivity Issues in Sea Port Environment
Hey Guys,Our current ( outdated ) wifi system is based on Cisco 4400 Controller with B/G AP's with 8dbi dual omni antennas which mounted ...
Darrel Rhodes
Joined on October 5, 2018
51
Likes received
0
Conversations posted
105
Replies posted
61
Conversations followed
Conversations
Conversations 1 - 20 of 61
WLAN dropping clients frequently
I am troubleshooting an ongoing issue with our wireless network at one of our locations. Basically what's happening is that clients are ...
All SSIDs NOT visible on all Access Points
I have 11 SSIDs/WLANs configured on my Zone Director. I am not getting all of these showing up on all 17 of my access points. I have a va...
does the R510 beep?
It appears that my R510 periodically beeps. Does it have a beep signal and if so what does it indicate?
Looking for a letter of volatility for the ICX-7150-C12P
I'm looking for a letter of volatility for the ICX-7150-C12P. I need this letter before I can connect this switch to the company lab net...
I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh function?
I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh functtion? But I am afraid Mesh will not use ...
WiFi design for Logistics Warehouses
I'd like to ask for some advice on where to get design information for logistics warehouses. Essentially I'm trying to design and validat...
Sanity Check on my Unreliable WiFi: Do I Need More Access Points?
TLDR: ZD1200 with 9 r710 APs covering 21K sq ft macOS-dominant biz, constant connection issues. Would more access points actually fix the...
Enabling Mesh
We have two zone directors, our production ZD3000 with all APs and a test unit ZD1200 (0 APs at the moment). There appears to be an area ...
Urgent Question About T301
Hello guys. A Urgent Question ==> How To Mount And Oriented A Ruckus T301 Serie To Get A Good Signal
Trying to connect Ubiquity M2 client radios to a Ruckus R600
Trying to connect Ubiquity M2 client radios to a Ruckus R600. The UBNT radios connect just fine but will not pass traffic. I can get into...
R720 upload slow compared to R710 (Controlled by ZoneDirector 1200 10.1.1.0 build 55)
Hi Situation (in basic/short - maybe little too basic): 4 WLAN's deployed. About 20AP's (different models). R710 controlled by ZD 1200...
R600 (Wave1) vs R720 (Wave2) for primarily mobile clients
Hello,I've worked with some wireless hardware from other vendors before but I've read a lot of good things about Ruckus and I'm looking i...
H510 - SSIDs isolated to individual switch ports
I've seen similar questions asked, but this is a bit of a unique setup. I want to be able have 4 SSIDs, we'll say 1-4, SSID 1 is isolate...
How to configure network unleashed with aps on different subnets?
I have a company with two offices connected by a vpn. The small office only has one AP. How can I make this ap connect to the master AP o...
R720 with R500
Hi,I have setup office wifi with R720 and R500 in mix.has about 8 APs in two floors . All the APs are running with firmware version 200.6...
Ruckus R510 provide only specific wlan in a specific ap
Good day, we already use Ruckus R510 to provide guest network and corporate network in our conference rooms. We dont have any controller...
T310c Mesh range
Dear all, Do some one know what is the T310c mesh range? I mean up to how many meters you can mesh with this Outdoor AP? There is nothing...
Is the ZoneDirector 1200 after an upgrade from 9.9.0.0 to 10.1.2.0.210 still compatible with R300 APs?
Hi there, i am very new to Ruckus and inherited a Ruckus environment with a ZD 1200 on FW 9.9.0.0 and 10x R300 APs, which are also on FW ...
Using multiple R310's with R500?
I am researching hardware before purchasing. Attempting to replace a network in a large home. I'm planning to use four R310's and one R50...