Conversations

Conversations 1 - 20 of 26
Photo of Clayton Tavernier
R600 - clearing counters
Is there a way to clear the error counters on an R600 access point, either via the SmartZone controller or the AP CLI?  Thanks.
  • Clayton Tavernier, 3 weeks ago

  • 1 me too
  • 0 replies
  • Question
Photo of Clayton Tavernier
SmartZone 100: APs disconnecting
We have two SZ-100 controllers and 925 APs.  We normally get one or two APs disconnecting daily (not rebooting, just getting the disconne...
  • 1 me too
  • 4 replies
  • Question
Photo of Clayton Tavernier
ICX 7750 routing table confuses me
We have a 7750 as our core router and remotes sites with either a 7750 or 7450 as their router.  The configurations were set up by an out...
  • 1 me too
  • 8 replies
  • Question
Photo of Clayton Tavernier
BNA: listing elements of stack
We had an outside vendor redo the networks at one of our sites so we have nice new stacks in our IDFs instead of separate switches.  In B...
  • 1 me too
  • 1 reply
  • Question
Photo of Clayton Tavernier
BNA: Alert emails
We recently tried to upgrade our BNA from 12.4.4 to 14.2.10.  The Ruckus tech I talked to said it wouldn't be a problem but the upgrade e...
  • 1 me too
  • 12 replies
  • Question
Photo of Rithvik Musuku
Can I use an ICX 7150-C12P as an umanaged switch without doing anything in a terminal emulator?
I have an ICX 7150-C12P switch that I would like to use in my home to connect 12 devices to my router. How do I set it up as a simple unm...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Clayton Tavernier
ICX 7150 - dumb switch default password
I've installed a couple of Ruckus ICX 7150 switches with no configuration and I would like to configure them remotely but when I ssh in, ...
  • 1 me too
  • 5 replies
  • Question
Photo of Clayton Tavernier
ICX port blocking
I've got a 7750 as my core router and 1GB connections to 9 sites with 7450 routers.  7 of the connections work and 2 do not.  As far as...
  • 1 me too
  • 7 replies
  • Question
Photo of Marko Teklic
Severe flaw in WPA2 - cracked
when can we expect to see update for this https://arstechnica.com/information-technology/2017/10/severe-flaw-in-wpa2-protocol-leaves-wi-f...
  • 34 me toos
  • 50 replies
  • Question
  • Answered
Photo of Clayton Tavernier
SmartCell Insight 2.5.1 & Outgoing Mail Server (SMTP)
Is there some sort of trick to this?  I tried "smtp-relay.gmail.com" with port 25 and 587 and I get the "cannot connect to the SMTP serve...
  • 1 me too
  • 7 replies
  • Question
Photo of Clayton Tavernier
[SZ100] 5GHz Radio Channelization: Auto vs 80 vs 40 vs 20?
I attended a very nice Ruckus class yesterday and learned that my 5GHz radio channelization should maybe be at 40 or even 20 instead of t...
  • 1 me too
  • 13 replies
  • Question
  • Answered
Photo of Clayton Tavernier
SmartZone 100: forcing a client toward a proxy server
Is there a way in the SmartZone 100 controller to manually force a client toward a proxy server?  We have some bandwidth hogs and we can'...
  • Clayton Tavernier, 2 years ago

  • 1 me too
  • 0 replies
  • Question
Photo of Clayton Tavernier
SmartZone 100, R600 AP rebooting for unknown reason
We've got an R600 AP that's rebooting itself for unknown reasons at odd times.  There were 3 reboots the other night (roughly 5 minutes a...
  • 1 me too
  • 2 replies
  • Question
Photo of Clayton Tavernier
SmartZone 100: wireless clients connected but not showing up in the controller
I go to my Access Points, I find an AP with clients but when I try to find the clients connected to that AP, none show up. We recently h...
  • 1 me too
  • 2 replies
  • Question
Photo of Clayton Tavernier
Blocking a user from a particular SSID
We have an SSID that needs authentication and another SSID that just needs a password.  All on the same VLAN. Is there a way to block a ...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Clayton Tavernier
SmartZone 100: SMTP server settings
We have our SMTP server settings going through a local SMTP server but we want to shut it down.  I changed our Ruckus controller SMTP set...
  • 1 me too
  • 1 reply
  • Question
Photo of Clayton Tavernier
Identifying Rogue APs
We've got a SmartZone 100 and we're showing 175 rogue APs.  Is there a way to sort them by signal strength so I can try to pin down what'...
  • Clayton Tavernier, 2 years ago

  • 1 me too
  • 0 replies
  • Question
Photo of Clayton Tavernier
R600 Configuration Update Failed
I am trying to manually set the 5GHz radio channel on 5 different R600 APs and I'm getting "Update Failed" on the controller monitoring p...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Clayton Tavernier
SmartZone 100
We've got the SmartZone 100 v3.1.1.0.476. If I go to Monitor > Wireless Clients and I put an AP designation in the Search window, I shou...
  • 1 me too
  • 2 replies
  • Question
Photo of Clayton Tavernier
SmartCell Insight 1.4 missing APs
We've got 916 APs run by a SmartZone 100 and SmartCell Insight 1.4.  I'm trying to track a problem AP and I'm finding it's not listed in ...
  • 1 me too
  • 1 reply
  • Question