R730 channel utilization?
I recently purchased a R730 to integrate into my SOHO setting, replacing one of my three existing R720s which have performed flawlessly. ...
Ali
Joined on June 23, 2017
0
Likes received
7
Conversations posted
22
Replies posted
15
Conversations followed
Conversations
Ruckus IoT controller DHCP Option Question
So I understand how the Option 43 works well for the VSZ and ZD. However for the IoT controller documentation seems to be a bit confusin...
Phillips Hue - Connecting to IoT Controller
So has anyone had any luck connecting a Phillips Hue Bridge to the IoT module? Does it require any specific Plugin or should it connect ...
Ruckus Power Settings
Trying to work in Ekahau and figure this out. So if I set an AP power to 4dBm or 3dBm in Rukus what would that equate to? Am I taking t...
How to access "iwconfig" command?
Trying to get to the prompt where I can run the following command: "iwconfig wlan#". My AP is registered with a vSZ and I can only get t...
How can I see access point neighbors in VSZ
Running 3.5.0.0.808 VSZ. Is there no way I can simply see access point neighbors and what other SSID's are being broadcasted by them etc...
Which chipsets and CPU do the various Ruckus AP`s use?
Does anybody know what chipsets and CPU`s the various Ruckus AP`s use, as I cant find this information anyanywhere?Thanks
R710 AP image for vSZ carrier
Where to download or get the AP image for R710 to be recognize by vSZ carrier?
DHCP Option 43
So Ruckus suggests using the shimi.net website for Ruckus DHCP Option 43. However I would instead like to know what method is being used...
vsz-connected APs are not broadcasting SSID
Hi all, Recently we've implemented a public WiFi network which utilizes smart-meshing for a total of 4 out of 8 APs. Today we drove back...
R600 connected to VSZ - Radios showing off.
I have setup everything in the VSZ Domain --> Zone --> AP Group and WLAN Group etc. So all is setup and AP is registered and provisioned...
"Min" AP Power Setting
Can someone explain what the "Min" AP power setting actually means?
How does it affect the advertised transmit power when compared to ...