Is anyone else not receiving "Lost Contact" alarms with 9.10 ZD 3k?
I just upgraded our ZD3k to version 9.10 release 218. Since the upgrade I am not receiving any alarms. When I do a test, I receive the ...
Alan Rothenstreich
Joined on September 8, 2014
11
Likes received
3
Conversations posted
60
Replies posted
40
Conversations followed
Conversations
Conversations 1 - 20 of 41
Cannot reach managed AP's via browser.
My R600's are managed by a ZD1200. I can't reach the individual AP's via their IP address in the browser. I'm guessing I missed something...
Has anyone used the ICOM IP1000C with ICOM RoIP Radios with Ruckus APs?
We have a location interested in deploying Radio over IP by ICOM. It looks pretty straight forward as long as we do not have isolation t...
T series/ R700 reboot PoE switch will can't boot up
Any person has similar experience? I am using Cisco switch with T300 series AP and R700 AP with SCG Recently some of the AP will can't bo...
P300 SpeedFlex test , is it accurate?
Using a P300 bridge about a quarter of a mile apart to connect a ZoneDirector 1106 to six 7782 APs. We were expecting at least 500Mbps u...
POE+ on R710 and SG300-10MPP
Hi all, I've buy the Cisco SG300-10MPP for 3 R710, two of devices support 802.3at POE+ But when i use command "get power-mode" on R710....
Unstable Mesh Network
Hello, I try to be short. ;) Problem 9x Unleashed APs (T300 and T301s) on a big parking area. 2x of them are Root-APs. 7x are Mesh-APs....
R500 APs port flapping on Cisco Switch
Hello, I have 4x R500 APs with a 1200 Zone Director on version 9.13.3.0 build 22. The APs are connected to a Cisco WS-C2960X-48LPS-L POE...
Ceiling vs Wall mount for 7982?
Ceiling vs Wall mount for 7982? What is the optimal position and where can we see full radiation pattern map for its antenna array? Since...
ZD 1100 random crash
Hi there, since some time (and i think it has been quite a long time) i have a ZD1100 randomly crashing. To be honest, 2 ZD died in a r...
Recommended AP for Apartment Blocks 100 units
Hey guys, looking for some direction on an exciting project (well for me..) on which AP or AP's would suffice for broadcasting to 100 uni...
Mesh APs keep changing IP address and show as down in my network monitoring software, can I configure 2 IP on the APs
Mesh APs change IP and get marked down in network monitoring applications
Root-APs thinks he's a Mesh-AP resulting in Network Issues
Hello everyone, yesterday i was on a customer site because of some network issues. From time to time i lost 1 - 3 Pings within the whole...
problems creating a hotspot using Wispr
Hello, i'm having a little difficult in setting up an external custom portal using WisPR with local DB auth. I just created a very simple...
Email Notification on ZD Failed!
Need help! I am setting up an email notification on ZD3000 (ver 9.5) but always "Failed!". I've tried all my email accounts gmail, yahoo ...
hi would like to ask max horizontal of t300 ap in free space, im currently designing and would like to know effectivity range
t300 max range horizontal distance
P300 Multipoint on same Switch
HI Team We've been provided a wireless bridge solution, however it doesnt appear to be working for us. As usual, they sell us the produc...
Mesh disabled in ZD, but 'AIR' LED flashing
Have a z7982 that is flashing it's "AIR" LED as if it were trying to airmesh, but that is disabled in the ZD config for it. There are ab...
Wifi keeps switching channels, causing disconnects?
As mentioned above using the r500 clients report disconnecting frequently as it changes frequency channels causing disruptions.
mesh ap takes 30 mins to join
We have a Zone Director ZD3050. Our 7962 Mesh AP's are taking 30+ minutes before they join the Zonedirector then they will work fine. W...