Conversations

Conversations 1 - 20 of 36
Photo of Axel Robbe
GCE (Google Cloud) image for vSZ not accepted .raw.bin
Dear all, I'm wondering why Ruckus decided to deliver a GCE image for the vSZ as a .bin image. According to the manual, as well as cloud...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of eXDeeNZ
Setting ethernet port mode to bridge in Unleashed (R500)
The R500 has two ethernet ports. It seems however there isn't the level of detail or configuration i'd expect with the physical ports com...
  • 1 me too
  • 2 replies
  • Question
Photo of Kabelo Masinamela
Virtual smart zone boots
We had a power failure and after that the Virtual Smart Zone boots, but none of the services start so no access to the web interface and...
  • 1 me too
  • 1 reply
  • Question
Photo of Adam Bolte
5G Client packets dropped (packet size exceeded?) on 7982 in standalone bridge mode
I've got 4 7982 boxes running in stand-alone bridge mode, and have been running okay, however this morning I suddenly had seemingly every...
  • 1 me too
  • 8 replies
  • Question
Photo of mh
I can't join R300 to ZoneDirector 1200 - cannot upgrade AP fw
Hello, I have R300 AP and I can't join it to the ZD1200. ZD1200 fw is: 9.9.0.0 build 216 R300 fw is: 9.8.3.0.14 When I approve AP on th...
  • 2 me toos
  • 6 replies
  • Question
Photo of Ali
DHCP Option 43
So Ruckus suggests using the shimi.net website for Ruckus DHCP Option 43.  However I would instead like to know what method is being used...
  • 1 me too
  • 3 replies
  • Question
Photo of Keith - Pack Leader
Handy tool: DHCP Option 43 builder
http://shimi.net/services/opt43/ Author says: "You're welcome to use; Disclaimer: Not really debugged, I take no responsibility for er...
  • 3 me toos
  • 3 replies
  • Idea
Photo of Nnamjin Roh
What is " snapshot disk" command in VSCG for?
I found "snapshot disk" command in VSCG.  How can I use this command"  what is this command for?
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of Rosa Martínez Martin
Config MAX power
It is possible to adjust the power of a specific AP to the maximum using cli?
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Steven Rizkalla
Using DHCP on the Zone Director
Hi I am new to Ruckus and am wondering the following. Since we are very low on network IP addresses in the AD DHCP, can I have the Ruckus...
  • 1 me too
  • 2 replies
  • Question
Photo of Rasmus Thorslund
script to turn off either 2.4 or 5Ghz?
I need to calibrate our network for spot, but in order to do so we need to disable each band while testing the other. We are running on a...
  • 1 me too
  • 1 reply
  • Question
Photo of Aceflyer
Unleashed T300 displaying Island.xxxxxx unable to recover
We have a unleashed T300 that's dispalying Island.xxxxx however the ssid has a security key as well, we have done a factory reset, but no...
  • 1 me too
  • 4 replies
  • Question
  • Acknowledged
Photo of Ali
Ruckus Power Settings
Trying to work in Ekahau and figure this out. So if I set an AP power to 4dBm or 3dBm in Rukus what would that equate to? Am I taking t...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Nalin Wijerathna
Can we connect other routers to ZoneDirector like D-Link ?
We have connected all the Ruckus AP's to ZoneDirector. And I want to connect D-Link AP to ZoneDirector. So is it possible ?
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of sej ola
ZD1100 and R300
Hi Team, May I ask if ZD1100 Version 9.6.1  can manage R300 AP?
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Michael Berger
Does Ruckus Unleased fully support 802.11r, 802.11k and 802.11v for best iPhone roaming experience?
I have seen 802.11r and 802.11k somewhere in the configuration but no 802.11 v. I'm interested in this feature for R610, R510 and R310 APs.
  • 1 me too
  • 4 replies
  • Question
Photo of Jojy MJ
Is there any way to block use of connectify software in wireless network.
Because of WiFi sharing network traffic become high and its making lot of issues.
  • 1 me too
  • 2 replies
  • Question
Photo of irvan irvan
Login AP WebUI from controller
Hi, there is possible to open AP WebUI from controller Smartzone100 ? i already try connect to ip AP, but the AP WebUI cannot open.
  • 1 me too
  • 1 reply
  • Question
Photo of Jeronimo
SCI 3.0 behind NAT?
Hi. I have a question. We have SCI behind NAT. We have configured port-fowarding as public 5443 to private 443. But it works bad. SC...
  • 1 me too
  • 4 replies
  • Question
Photo of Craig Webb
ZD1112 WLAN Password Complexity
Can anyone advise how to set/change the password complexity, either globally or for specific WLANs Thanks!
  • 1 me too
  • 0 replies
  • Question