is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?
is it possible to enable SNMP on Wireless AP and get it via the network and monitor via PRTG?
Conversations
Recent Conversations
Conversations 106 - 120 of 633
T710 running off of cable plant power
We are looking to install a Unleashed T710 in a area of our system where cell service is poor for our service techs to connect back to th...
Set Max MCS Rates?
I would like to reduce the available MCS rates on a meshed deployment with the goal increasing the stability of a long range link at the ...
Can the Ruckus Zone Director support using Radius/LDAP per user credential to limit how many device they can connect to a SSID?
I have a ZoneDirector 1200 and Version: 10.1.0.0 build 1515. My client would like to have the following result:1. When a student connect ...
DESIGNING HYBRID NETWORK OF OPTICAL FIBER AND WIRELESS MESH, RECOMMENDATIONS OF USED EQUIPMENT AND ADAPTERS
ESTOY TRABAJANDO EN UN PROYECTO, DONDE ES POSIBLE REALIZAR UNA IMPLEMENTACIÓN DE UNA RED INALÁMBRICA DE ALTA DENSIDAD, QUIERO SABER QUÉ I...
How to t300 first setting?
i find t300 software ,T300_200.7.10.2.339/OutdoorAP-100_1_0_0_432 , etc. But I don't know where is the 'bl7' file open wizard. I will c...
7731 wireless status parameters details
I wonder what is "Up/Down" parameter which is at the page of wireless status page? Is it OK if Rx RSSI and
Ack RSSI around 50?
Ruckus Smartzone 300 and Arista network switches compatiblity, Does Smartzone 300 support NAC or Posture Assessment?
Hi, We were planning to implement ruckus wireless solutions with the smartzone 300 controller. I heard also the smartzone can manage t...
Attribute Simultaneous-Use
I want to limite session using Freeradius Accounting with the attribute Simulateous-Use, We setup the Zone Director Controller with capti...
T300 Connectivity Issues in Sea Port Environment
Hey Guys,Our current ( outdated ) wifi system is based on Cisco 4400 Controller with B/G AP's with 8dbi dual omni antennas which mounted ...
7731 beacon problem
i am using ruckuss 7731.Root and non-root bridges.Distance is 270 meter. But they disconnection suddenly over 10 second in 3 hoursit is ...
Using 3rd party AP as a bridge to existing Ruckus network
Hi. Hopefully this is an easy question for someone to field and the answer will be straight-forward. I need to extend wi-fi coverage to...
_large.png)
Question about vSZ managing the Ruckus AP?
hi buddy, this question is not about any issue. I want to explorer how vSZ manage the Ruckus AP? Why I question this? My Ruckus AP alre...
How do I persist selected settings after a factory reset on stanandalone or SZ/ZD AP like FM template?
Hi.Default IP on Ruckus AP is very helpful.But sometimes this makes migration work difficult because we don't connect directly such as In...
R700 - WIFI Signal getting disconnect automatically; plz help
in my organisation, we have 6nos of R700 AP and i configured 2.4,5G Radio signal with same SSID on them we are using this from the past 2...
ZoneFlex outdoor access points uniquely combine adaptive antenna technology and adaptive meshing to enable a new level of outdoor performance at a low cost.
