Conversations
Recent Conversations
Conversations 61 - 75 of 502
Need a power adapter for the outdoor model of the R710. Can't find any information on this, anywhere. Anybody have a link to buy one? Kno...
Using a T710 with P300 connected to PoE out for back-haul
I need to provide Wifi To areas with no wired network infrastructure, mounting locations will be on the light pole. I was wondering if th...
MTBF for ruckus products
What is the MTBF (meantime between failure) value for below ruckus products : Zd3000 Zd1200 R500 R710 H500 T300
7761CM - Set Director IP not available
When attempting to set the director ip on the 7761cm Outdoor access point using "set director ip {ip}" I receive the following error. Co...
the power outlet the light of PWR
Dear support that I have an AP R500 connected to the power outlet, the light of PWR is very bad and the AP does not work, what could be t...
Is there a limit to the number of dynamic vlans a single SSID can support?
I am considering a project that may have up to 200 different vlans on one SSID, is that supported?
Possible to use PoE injector instead of AC adapter for T710 in mesh mode?
Need to power multiple T710 to use in mesh mode.
Don’t have 4-pin AC adapter, but do have correct PoE injector. Can I use injector wit...
Amazon Purchase
We are looking to buy a Zone Director 1200 and some outdoor AP’s for our campground. Is it ok to buy them from Amazon or do you need to g...
New System Recommendations - Campground
We are a campground in the foothills of California on 18 acres. I’ve been told from other campground owners with similar layouts/size tha...
Scheduled reboot to revert from changes to P300 via CLI?
I would like to ability to do a "reload in xx:xx:xx" style command like you can in IOS. The idea would be to schedule a reload to revert ...
T300 initial login failure
I have to do the initial login to a T300 and do initial configurations. I have not been able to login to this using the PoE and trying to...
Announcement: UMM 2.1.0.0.27 (GA) is now available on Support
Ruckus is happy to announce that we have also coordinatedrelease of our
Unleashed Multi-Site Manager (UMM) v2.1.0.0.27 GA with ournew...
Virtual SmartZone with R610 AP
I have setup my Virtual Smart Zone controller with version 3.6.1.0.227. I have a ZoneFlexR610 AP but i don't know how to connect it to my...
Client Timeout for WISPR
Does anyone think that the timeout for the wispr authentication on the smartzone 100 should be allowed to be longer than 10 days? I feel ...
When did Ruckus stop shipping mounting hardware with outdoor access points?
No mounting hardware with T610 access points?