SZ 3.6.2 and WLAN Group VLAN Override - greyed out
Hi Gang,I'm trying to figure out how to use the VLAN Override feature on a per WLAN basis under a given WLAN Group. The feature is there...
Conversations
Conversations 61 - 75 of 560
Can't use MAP find the AP.
Hello to All,I'm newbie with ruckus and I am running 9.13.3.0.157 on a ZD1200 with T300.The problem I faced was that my company had a tot...
Is Channelfly usable in real world scenarios?
While ChannelFly is a truly remarkable technology, I'm wondering if people have found that it's usable in real-world scenarios.
For ...
Which model is this?
This looks like Ruckus, but i can't figure out which model this is. There is a SKU on it, it's probably organization specific, google ret...
SmartZone 100 leader - failback
Dear support, I have two SmartZone 100 controllers and they are working together in a cluster (one as a leader the other one as a follo...
Downgrading Smart Zone 100 from 3.6.2.0.250 to 3.6.2.0.222
Hi Ruckus,I have 2 Smart Zone controllers and I spent the whole day trying to downgrade-upgrade the - unsuccessfuly.They work in cluster,...
Smart Zone 100 Flagged status, license and support activation
Dear support,I am working with Ruckus Smart Zone, Ruckus AP (outdoors and indoors) first time in my life and I have some question in hope...
t710 to t710 wireless connection help
I am using two T710’s. One is at a building approximately 220’ away at my IDF. My goal is to shoot a wireless connection to my MDF where ...
How much time Smart Zone 100 needs to boot/to start working after power failure?
I configured two smart zone controllers to work in a cluster. Was checking out how fast (or slow) it will boot up/start working after pow...
Guest Access re authentictaes
Hi guys, So we have a guest access on one of our lodges and the guest are able to connect with no problem. The only issue is now that wh...
Older APs with 64mb RAM - performance
Would like to upgrade Zonedirector 3000 to 9.8 to add newer AP models but still wan to support older APs, mostly 7762s. What does this me...
Wifi 6: Will OFDMA & MU-MIMO operate simultaneously?
Once OFDMA is enabled on the new WiFi 6 AP's, will OFDMA and MU-MIMO operate simultaneously? For example, let's say you have a factory...
BeamFlex+ Simultaneous Unique Antenna Patterns
Can BeamFlex+ simultaneously create several different antenna patterns? Say there are 4 clients, each one is 90 degrees apart fro the ne...
Someone have 3D cad or 2D of T310C to send me?
P300 Communication Status in SCADA
I am using P300 Root and Non-Root bridges. I need to take the communication status and the signal strength in the SCADA(Wonderware Intouc...
ZoneFlex outdoor access points uniquely combine adaptive antenna technology and adaptive meshing to enable a new level of outdoor performance at a low cost.
