Noticing a huge difference between the R710 and R600/700 for distant 5GHz clients
As a part of troubleshooting my lost heartbeats issue, I swapped the locations of my R600 and R710 to rule out the underlying wired netwo...
Conversations
Conversations 16 - 30 of 35
Unleashed to Standalone R600 fails
Reflash from R600 Unleashed to Standalone fails. After 45 minutes on the chat/phone with support, they provided article on how to reflash...
Monitoring AP's with Nagios/Icinga
So, since we installed the Ruckus setup I've been looking and thinking about ways I can monitor the AP's, mostly I'm concerned about over...
We need bypass authentication in Hotspot with Standalone-AP.
Hi. I think that we need bypass authentication in hostpot with Standalone-ap. On SA-AP, we need three solution. First, SA-AP, Second, ...
Rugged APs
Will RW have any ruggedized APs, like Cisco has for some of its models.
In warehousing and some other locations, sometimes there is du...
NPS and ZD3000 802.1x
I setup NPS and ZD for 802.1x. I tested the authentication between the NPS and ZoneDirector and everything works just fine. But when I tr...
R500 & R600 with external antenna options.
For HD and some other verticals one absolutely needs the option of connecting external directional antennas to an AP, so R500 and/or R600...
Flex Master Business Metrics
How does the Flex Master? I can monitor controllers Zone Director? How many? Can a report of traffic amount of Aps, number of accesses, T...
Zone Flex 7962 firmware upgrade issues
Hi I have a Zone Flex 7962 AP that I use in (standalone) running firmware 8.1.1.2 I was able to upgrade from 8.0.0 to 8.1.1.2 using the w...
Client OS fingerprinting on Standalone AP
Ladies and Gentlemens,
I am using a standalone AP 7352/7982 with Latest 9.8 code. Client OS fingerprinting is ENABLED however for me t...
ZoneFlex 9.8.0.0.269 GA Release is now available on Support Portal.
ZoneFlex 9.8.0.0.369 GA Release is now on Support Portal.
Ruckus has posted version 9.8.0.0.369 as the official GA release for ZoneDir...
Load Balancing APs and ZoneDirector
We are moving to 10Gbps Backbone and we are seeing a larger amount on devices connecting. We'd love to increase throughput to the APS and...
Add LLDP support to Ruckus devices
This has been an enhancement request open since Jan 27, 2009 3:14pm on the old website.
Not having LLDP support is a major downside fo...
Polling Active Clients via SNMP.
I have a ZD1150 and 23x 7372 APs which im trying to poll active clients via SNMP from.
i can poll the ZoneDirector OK with the followin...
How to view standalone 7363 configuration via AP CLI?
Can anyone tell me the CLI command to view AP's configuration, similar as show running-config in Cisco IOS?
ZoneFlex Indoor AP's
