Wired Clients not listed in unleashed
I have a mesh network with two r510 unleashed. I have a client connected to the mesh node in the ethernet port (not POE). It seems to h...
Conversations
Recent Conversations
Conversations 151 - 165 of 1841
For the R610, turn on secondary port at 802.3af?
We have 100+ R610s that replaced R500s and R600s. The R610s require 802.3at for full funcationality. I have POE+ switches that have bee...
Ruckus ZD1200 Reports
Hi!About reort of ZD1200, refer internet traffic trend, its only possible to take a 24h report? I need a mouth report for study and upgra...
Ruckus ZoneDirector 3000 setting VLANs problems
Hi All,
Recently I’ve setup different VLANs on my network and would
like to split internal and guest WLANs to two different VLANs.
...
How to make ap router mode with cli?
Hi. We want to make ap router mode using only cli. We configured everything setting, but don't found how to configure local-subnet at w...
Is there a limit to the number of dynamic vlans a single SSID can support?
I am considering a project that may have up to 200 different vlans on one SSID, is that supported?
VLAN and Access Policies
I have some issues with the recent iterations of the ZoneDIrector firmwares. We have 2 SSID's, one for IT access to wired and the other ...
Ruckus Virtual Smart Zone client_mac and uip encryption
Hello, I configured my Virtual Smart Zone controller with a external captive portal. When the user tries to login, he is redirected to h...
R720: Large downlink performance difference with iOS clients between vSZ 3.6.2 and vSZ 5.1.1
I don't have a lot of time to investigate this further but I'm curious if it corresponds to any known issues....I'm noticing that using a...
Ring doorbell -- 2.4 ghz connection only
I recently installed a Ring 2 video doorbell at my house. It is having problems maintaining a connection to my APs even though the wifi ...
Virtual SmartZone html login form example
Does someone has a captive portal login form with POST action and required hidden fields example to use with VirtualSmartZone? Thanks!
Layer 3 Adoption/Provisioning Issues
Hi All. I have purchased some additional AP's for a client (r310's). They will be using these at a remote location. I am setting these u...
Support reps still using [email protected] and losing email responses
Ok, this is driving me a little crazy but I've had several support cases open where Ruckus support reps are emailing me from "support-cas...
Enabling multicast for a Sonos environment
I am having trouble with a ZoneFlex R510 in standalone mode, and integrating Sonos. In a nutshell, I can't get the Sonos hardware to join...
What can cause certain models of cell phones to connect quickly to the internet through a r700 or r600 and others not?
I work in a college with approximately 10,000 students. During the semester we received some complaints that on the third floor of a bloc...
ZoneFlex Indoor AP's
