_large.png)
Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)?
Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)? Solution that AP Zone remains on an older version that s...
Conversations
Recent Conversations
Conversations 46 - 60 of 604
M510 and Zone configuration (SmartZone)
If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is ...
T310C Rejected by SZ100 ACL
Hi all, I'm experiencing ACL rejecting issues of a new T310c im trying to add to a SZ100. Below is the error im seeing on the event logs....
Controller Managed APs broadcasting Open ssid with WLAN configured with WPA2 and 802.1x
Controller-managed APs are working fine and broadcasting correct SSID configured with 802.1x and standard WPA2. but in one zone the APs a...
Help me explain please
Hi guys,
please help me explain about :
1. What is the cluster ?
2. What is cluster function ?
3. Can access point connect or ...
VSZ-H upgrade 3.6.1 to 5.0.0.675 not showing wlan lists, radius list, and admins
After upgrade my single node vSZ-H, for some reason I can not see anymore the lists about ssid create before the ugprade, nor the radius...
Cluster NAT IPs and DNS
I've got my Public DNS pointed at a single Public Cluster node ( H1) in a three node cluster. Should I change DNS so the Record includes ...
Auto Cell Sizing between R510 and R720
I test Auto Cell Sizing between R510 and R720. They are both controlled by vSZ 5.0.0.0.675.On controller I see that R510 and R720 are nei...
MAC address authentication on Ruckus Smartzone-E 3.6
I am looking a solution as MAC address authentication on Ruckus Smartzone-E 3.6 with Radius server. Is it possible Version 3.6? Regard...
URL filter on SmartZone 5.0 / defined by AccessControl - UserTraffic
When I want to active an URL-filter for porn, do I activate it on WLAN-side or AccessControl-UserTraffic? For me it works well on WLAN-d...
Connect AP ( R510) to Virtual SmartZone - Essentials 3.6 using wireless only ( without cables conected to the network)
Connect APs ( R510) to Virtual SmartZone - Essentials 3.6 using wireless only ( without cables connected to the network) - I`m planning...
Client Disconnection Issue
Anyone
aware of client disconnection in 802.11ac access point specially in
case of Andriod devices and RA Link Wireless network cards...
Ruckus Virtual SmartZone on Nutanix AHV
Is Virtual SmartZone supported to run on Nutanix AHV clusters? Can't seem to find any information about it and haven't heard of anyone w...
Roaming and captive portal authentication
Hi guys, I have a network composed of some indoor APs in remote locations. All the APs are connected to a virtual SmartZone in Bridge mo...
unleashed hotspotservice external login page
Hi everybody, For an Unleashed network I want to configure a simple WISPr hostpot service with an external login page for username and ...
The Industry’s Most Scalable and Versatile WLAN Platform. The SmartCell Gateway (SCG) 200 represents the first in a new category of scalable and versatile WLAN controllers with support for 3GPP compatible WLAN gateway functionality. Ruckus virtual SmartCell™ Gateway (vSCG), is a Network Functions Virtualization (NFV) based WLAN Controller for service providers and enterprises who desire a carrier-class solution that runs in the cloud.
