1843 fe5naf inline large

SmartCell Access Points

Conversations

Recent Conversations
Conversations 1 - 15 of 132
Photo of Andrey Paramonov
How many entries can I add to ACLs on SZ100?
I have a project where customer says that he needs: 1. MAC authorization in WLAN; 2. ACL entries number should be more that 8k. I can't ...
  • 1 me too
  • 5 replies
  • Question
Photo of Daniel Beaver
What firmware is recommended for R500, R300, H500 on vSCG?
Our company has been running into repeated issues with each of these AP types and we're hoping to hear from someone who works with these ...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Skaap2.0
untagged a vlan on Lan2 for AP's R500, R510, R610, R710 and R720's for IPTV steaming on SZ100 Firmware Version 3.5.1.0.862
Hi All,I'm busy deploying a new SZ100 on a site that has a IPTV system.The TV's in the rooms connect directly to the AP on Lan2,I have se...
  • 1 me too
  • 4 replies
  • Question
Photo of Skaap2.0
H320 not being picked up by SZ100
Hi All,I'm busy deploying a new SZ 100 with H320 Access Points on a New Ruckus ICX7450 and ICX 7150 network, I'm having a issues with the...
  • 1 me too
  • 1 reply
  • Question
Photo of AP
T series/ R700 reboot PoE switch will can't boot up
Any person has similar experience? I am using Cisco switch with T300 series AP and R700 AP with SCG Recently some of the AP will can't bo...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Cordelia Naumann
Announcement: Finally! Some Community Guidelines...
As you might have noticed, the Ruckus Wireless Community is getting more oversight these days, and myself and Michael Brado have finally ...
  • 6 me toos
  • 2 replies
  • Announcement
Photo of Cordelia Naumann
License activation for a SmartZone 100 controller
Check out our new video on how to activate your license for the SmartZone 100 controller. https://www.youtube.com/watch?v=wZXQPqqLJuI
  • 1 me too
  • 1 reply
  • Announcement
Photo of yedianlin yedianlin
how to change the APs ip setting to static quickly
Hi guys, i want to  changed the APs' ip setting to Static in sz100, but I have more than 300 ap, if any method such as script file  to d...
  • 1 me too
  • 2 replies
  • Question
Photo of Paul McGuire
AP firmware 3.6.0.0.709 High Connection Errors
I have upgraded my Vsz to 3.6.0.0.510 and upgraded the APs to 3.6.0.0.709.  After the upgrade i noticed that almost every AP had a high p...
  • 10 me toos
  • 19 replies
  • Question
  • Answered
Photo of Greg White
GRE / Centralized Forwarding MTU - Jumbo frames?
Hello, We run a sparsely distributed WiFi hotspot network on our own infrastructure which supports frame sizes beyond 2000bytes in all ne...
  • 1 me too
  • 1 reply
  • Question
  • Acknowledged
Photo of Ajay Kallam
HI,
I have ruckus r-300 access point i am trying to connect it to a zone director and it is getting connected but status is disconnected can ...
  • 1 me too
  • 4 replies
  • Question
Photo of Dimitri Stakov
configuration hotspot(WisPr) local in VSZ-High
Hi, I'm setting up a Hotspot on the Virtual Smart Zone - High 3.2 ruckus platform.  For this I turn to AP Zone >> Hotspot (WISPr) Porta...
  • 1 me too
  • 1 reply
  • Question
Photo of Jeff Roback
Beamflex causing roaming problems with warehouse devices
We’re having a really tough time getting 25 R610’s working in a warehouse environment with Vocollect (Honeywell) T5 devices that are used...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Michael Brado
Announcement: SmartZone 3.4.2.0.217 (MR2 Patch3) is Available on Support
Greetings,     Ruckus' many software, quality, and test engineers have built a latest version of SmartZone 3.4.2.0.217 (MR2 Patch3) for ...
  • 2 me toos
  • 0 replies
  • Announcement
Photo of Peter Kley
vSZ HS and disabling 2.4ghz on an SSID
I can't seem to figure out how to disable 2.4ghz on a SSID. All other posts seem to talk about the ZD and they don't seem to be the same....
  • 1 me too
  • 5 replies
  • Question