Zabbix Unleashed monitoring
Hello all,I am trying to monitoring Ruckus Unleashed in Zabbix with SMNP. I have 1 master AP and 4 members APs.As I have checked, I can m...
Conversations
Conversations 76 - 90 of 632
Updating a Ruckus unleashed AP's after the master has been updated
The Master AP is running 200.6.10.1.310Our 9 other APs are running 200.0.9.9.608 I log into the interface, go to a AP which tells me it...
Ruckus R600 Reboot when it can't reach gateway.
I have a single ruckus r600 ap in unleashed mode everytime the Master AP can't reach it's gateway it reboots which takes forever to boot ...
What does the message "send_controller_config line: 96 Controller connecting error, errno: 2 No such file or directory" mean?
I estimate 75% of the syslog entries are made up of the message "send_controller_config line: 96 Controller connecting error, errno: 2 No...
I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh function?
I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh functtion? But I am afraid Mesh will not use ...
can we mix R500 and T310 model of Unleashed APs
can we mix R500 and T310 model of Unleashed APs
Rogue Devices in Unleashed
I was wondering if I could get some clarification on the RSSI values reported in the rogue devices tab in Unleashed. The numbers reporte...
Losing connectivity to gateway with wireless client isolation
Hi all,Every now and then, my phone will lose connectivity to the gateway.Summary below.1. I have 3 R610 APs controlled by Unleashed.2. I...
Configure all Ruckus Unleashed as a Master AP on same network ?
Hi, is there anyway to configure all ruckus Unleashed as a Master AP on same network ?
Why can't we show the client speed in Unleashed?
I converted an R610 from standalone mode and I notice I can't see the client connected speed any more. Why was this feature removed? It...
Ruckus R610 not working with SIP
I have a Ruckus R610 with 200.7.10.2.339. Suddenly, my VOIP provider (ONSIP) has become flakey after the above firmware upgrade. Some pho...
How to add additional unleashed device ?
I have 2 R310 devices in office.Both was working fine.I upgrade both to 200.7.10.2.339.Master was upgrade successfully but another one wa...
Firmware issues?
Hello all. I have 2 Ruckus unleashed WAPs at my home, and R710 and R510. I have Gigabit internet service. I recently upgraded the firmwar...
"heartbeats lost" after upgrade to Unleashed 200.7.10.2.339
I have a tiny network with 2 R600s in Unleashed mode. Last night, I upgraded to the latest (200.7.10.2.339) that apparently came out abo...
Why isn't 802.11k and 802.11r enabled by default in ZoneDirector?
For roaming purposes having the 802.11k and 802.11r protocols enabled is supposed to beneficial. So, why are these protocols disabled by ...
With Ruckus Unleashed™ Access Points, small and medium businesses can deploy Wi-Fi in minutes and configure it in just 60 seconds. Take advantage of a low-cost, high performance network that delivers an optimal wireless experience for your customers.
