Mark ad-hoc as malicious ?
HiWhy can't I mark ad hoc entries in "Currently Active Rogue Devices" as "Malicious" in WIPS ?Thx
Conversations
Conversations 31 - 45 of 471
Unleashed with R610 and R310...Can they run different firmware?
I have a project with 4 R610's, 2 R310's and one T301. As it turns out the T301 and R310's latest firmware is 200.7, yet the R610's can ...
standalone, unleashed, controller base firmware speed difference
hello, i have question about Speed difference by firmware type of all APsfor exmaple i tested R550 AP standalone firmware 1. standalone ,...
how to know if my AP already has firmware ruckus unleashed
how to know if my AP already has firmware ruckus unleashed?
UNLEASHED
Can I download the ip addresses, which connect from my ruckus unleashed ap to an excel file, from the ap dashboard?
Looking for best practice for managing two unleashed networks for older and newer APS (unsupported Firmwares)
I have several Wave 2 and several wave 1 unleashed devices. Are there best practices for running two unleashed networks so that I can ma...
ICS 7150-c12p / R510 X 2 setup question
I about to close on my house which in installed with a ICS 7150-c12P + 2 access points R510. They builder doesn't do the configuration t...
Administrator access via Active Directory?
Is it possible to login to the web UI authenticated using AD? I can't seem to get it to work. I created a role, made sure it it had sup...
Is 160Mhz unleashed support on the roadmap for r720, currently no support in 200.8?
So like the title says it's an important questions for those deciding between r710 and r720. It's advertised that r720 supports 160Mhz a...
Ruckus switch unreachable/disconnected after power outage
R720 Unleashed fast flashing CTL LED
I am running newest Unleashed firmware. Was trying to do a factory reset but lost power before procedure can complete. Now I can't acce...
New to Ruckus: Unleashed information and setup tips?
We are receiving some Ruckus networking gear to replace our infrastructure. I am reaching out for any tips for a first-time-user of Ruck...
What should my poe switch ourput be for a Ruckus R319
Hi, I have a neatgear poe+ switch and a Ruckus R310. All is working fine and I wanted to check what the power should be for this unit t...
R750 target fail detect
I'm getting frequent restarts for one of the R750 AP's with error: "target fail detect". Sometimes the AP is restarting with reason: appl...
R610 only showing 100 Mbps speed
I have a R610 AP connected to an ICX-7150-C12P switch using unleashed. The AP set up as a member AP and is connected via Cat6 to the swit...
With Ruckus Unleashed™ Access Points, small and medium businesses can deploy Wi-Fi in minutes and configure it in just 60 seconds. Take advantage of a low-cost, high performance network that delivers an optimal wireless experience for your customers.
