26629 1potfcp inline large

Community & Online Support Services

Conversations

Recent Conversations
Conversations 1 - 15 of 225
Photo of chennai itsupport
how to enable channel 140 for 40MHz on 5GHz in zonedirector 1200
Hi Guys... We are on 10.0.1.0 build 35 ZD1200... i can see that the channel 140 is disable by default... How can i enable it .....
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Jarryd De Oliveira
Intrusion Detection And Prevention - Stopped Working
Hi My Intrusion Detection And Prevention is enabled and used to work fine, but I have noticed for the last 3 weeks now, when I go to che...
  • 1 me too
  • 2 replies
  • Question
Photo of Marko Teklic
Severe flaw in WPA2 - cracked
when can we expect to see update for this https://arstechnica.com/information-technology/2017/10/severe-flaw-in-wpa2-protocol-leaves-wi-f...
  • 34 me toos
  • 50 replies
  • Question
  • Answered
Photo of Prime Shine Car Wash
Client "Kicking off STA" "ieee80211_move_to_non_assoc_list,4598" Reason=0
Client MAC: ***************Every hour or so a number statically assigned clients running our POS software will randomly lose internet con...
  • 1 me too
  • 1 reply
  • Question
Photo of brian koomen
Where do you reboot your SmartZone 100 sz100?
I have been all over the interface and still cannot locate a place where you can click on a button that will reboot the smartzone 100.SZ1...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of brian koomen
RADIUS EAP/PEAP authentication problem after no issues for over a year +
We have been running the SZ100 RADIUS option to authenticate users to our AD using a NPS. Yesterday users were no longer able to connect....
  • 1 me too
  • 3 replies
  • Question
Photo of Blong Xiong
Connection between building and football field office?
This is my first time doing something like this and would like some input as to if it is reasonable to implement wireless from building t...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of niwai
upgrade ZD firmware
I have zone director firmware v9.7. can I upgrade it directly to 9.13. Because we have H510 and R510 AP
  • 1 me too
  • 3 replies
  • Question
Photo of Howard Helg
Help with small WISP deployment.
I own a small WISP in the South Pacific using mostly Mikrotik and Ubiquity equipment. I have always wanted to progress to Ruckus equipmen...
  • 1 me too
  • 2 replies
  • Question
  • Acknowledged
Photo of simon raj
What are the challenges for the Wi-Fi in moving vehicles (car, Bus/shuttle)?
What are the challenges for the Wi-Fi in moving vehicles (car, Bus/shuttle)? What are the parameters to calculate the possible drop in s...
  • 1 me too
  • 3 replies
  • Question
  • Answered
Photo of vinicius souza
Replacement of the Ruckus R700 housing
Olá, eu vivo no Brasil, tenho dois R720, deixei cair ambos no chão e quebrou a carcaça, Só posso comprar a carcaça? attentius souza
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of chennai itsupport
Signature package
Hi Guys, We are on ZoneDirector 1200 with 5 R710 and R700... i wanted to download the signature package but couldn't find it on the suppo...
  • 2 me toos
  • 7 replies
  • Question
  • In Progress
Photo of Yoelianto Sasongko
How to configure and manage by zd if source APs from different vlan port (1,100,500).from 1 port zd connect to swith trunk all vlan
How to configure and manage by zd if source APs (1 ssid)  from different vlan port (1,100,500). for APs vlan 1 already can manage, but fo...
  • 1 me too
  • 2 replies
  • Question
Photo of Justine
No Captive Portal Redirection when using variety of Laptops except mobile/tablet
Hi Everyone,I'm currently having trouble with my client regarding on the captive portal redirection. We are using ZD3000 version 9.12.3.0...
  • 1 me too
  • 4 replies
  • Question
  • Acknowledged
Photo of Vu Bui Kim
icx7450
I have 01 SWITCH-ICX7450-24 Not identified 01 Module-ICX7400-4X1GF backside. It only identified 01  ICX7450-24 24-port Management Module ...
  • 1 me too
  • 1 reply
  • Question
  • Answered