blake_bernhard

8 Messages

•

150 Points

Mon, Jan 5, 2015 8:23 PM

Zone Flex 7962 firmware upgrade issues

Hi I have a Zone Flex 7962 AP that I use in (standalone) running firmware 8.1.1.2 I was able to upgrade from 8.0.0 to 8.1.1.2 using the web and the default settings although can anyone please advise if there is any new firmware available for this device.

I have downloaded the below although if I point to my FTP or TFTP server I get a

"Secure Connection Failed message"

https://support.ruckuswireless.com/so...

Responses

munish_munish

102 Messages

•

1.3K Points

6 years ago

Hi Blake,

Which browser you are using (Firefox ), Have you Tried Different browsers?

Thanks,
Munish

blake_bernhard

8 Messages

•

150 Points

6 years ago

Hi Munish,

Thanks for your reply I have tried Firefox and IE 10 & 11.

do firmware upgrades need to be completed in sequence?

munish_munish

102 Messages

•

1.3K Points

6 years ago

Hi Blake,

There is not sequence for APs, but for ZDs.

Try the following , seems to be an issue with browser . I was searching it online and found this

https://support.mozilla.org/en-US/kb/...

The file cert8.db in your profile folder may have become corrupted. Delete this file while Firefox is closed.

Open your profile folder:
Click the menu button New Fx Menu , click help Help-29 and select Troubleshooting Information. The Troubleshooting Information tab will open.
Under the Application Basics section, click on Show Folder. A window with your profile files will open.
Click the menu button New Fx Menu and then click Exit Close 29
Click on the file named cert8.db.
Press Delete.
Restart Firefox.

michael_brado

Former Employee

•

2.6K Messages

•

44.8K Points

6 years ago

I'm afraid the standalone AP auto-upgrade thru the Web server has not been
maintained for a couple years now. With modern AP firmware including a Local
upgrade method that allows you to browse to an image on your PC, after you
downloaded it from the Support portal, the online server usage has been limited.

As Munish mentioned, only ZDs need to be upgraded following a specific path
as memory tables changed between versions. APs can upgrade/downgrade to
and from any standalone AP image independantly.

From the Support page Downloads page, pull the 9.7.2.0.9 firmware for zf7962
model AP, and see if you can use the Local upgrade method to install it? Good
luck and best regards.

blake_bernhard

8 Messages

•

150 Points

so first time I attempted it using TFTP it got to 98% then failed tried again and now I get

The upgrade failed. The following reason was given.

the control file may be bad

Here are some other things to check.
•Check that all network cables are firmly connected and any network devices, including the router or adapter, ethernet hubs, etc., have electrical power.
•Check that the upgrade method, server name/address or HTTP URL, login info (when using FTP), and image control file information were entered correctly
•Check that the image control file and its content are correct for your product model

6 years ago

michael_brado

Former Employee

•

2.6K Messages

•

44.8K Points

What version of firmware do you have on the AP now? (from Status::Device)

On the Maintenance::Upgrade page, top line, do you have a "Local" upgrade method choice?

If you click on Local, you can Browse to the firmware file on your PC, and do not
need an image control file (only for FTP/TFTP/Web options).

6 years ago

blake_bernhard

8 Messages

•

150 Points

Managed to upgrade it had to use 9.7.0 first using IE 10 then I was able use the local upgrade option to upgrade to 9.7.2.

Can you please advise does 9.7.2 support band steering for a standalone zoneflex 7962 AP?

6 years ago

michael_brado

Former Employee

•

2.6K Messages

•

44.8K Points

Yes, band-steering is enabled by default in 9.7.2.0.9 standalone 7962 code.

Type "get withholding-limit wifi0" to confirm. Default enabled value is 7.

6 years ago

blake_bernhard

8 Messages

•

150 Points

rkscli: get withholding-limit wifi0
wifi0: Withholding limit (auth response): 1
OK
rkscli:

is that the message I was net to get also i cannot connect to the 5ghz ssid I have as I get an attempting to authenticate message

6 years ago

blake_bernhard

Zone Flex 7962 firmware upgrade issues

Responses

munish_munish

blake_bernhard

munish_munish

michael_brado

blake_bernhard

michael_brado

blake_bernhard

michael_brado

blake_bernhard

Was this helpful?