Skip to main content

4 Messages

 • 

100 Points

Wed, Mar 2, 2016 1:40 PM

ZD1100 unreachable after upgrade / cycle reboot every 30 min

I try to upgrade my ZD1100 to the latest version but since 2 hours of upgrade I can't access to apmngr . On my syslog server I can see this message  "The apmgr is not in Run state more than 1800 seconds and stop to reply Ping message from RSMD" But I can ping ZD but can't access.
Every 30 min ZD reboot ! Help Me ! I have a Backup of the last configuration. Thanks for your help !

Responses

824 Messages

 • 

13.2K Points

5 years ago

hi,

better you factory reset the controller and monitor. Downgrade back to old version and re-upgrade using new firmware file downloaded fresh to be sure...

4 Messages

 • 

100 Points

5 years ago

hi, I can access to my ZD1100 but I have this error message "Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused "

824 Messages

 • 

13.2K Points

5 years ago

which version is running on the controller? IS ZF7372 supported on that controller. If ZF7372 is supported then please re-upgrade the controller using a fresh firmware file

4 Messages

 • 

100 Points

5 years ago

ZD firmware version is 9.7.1.0.17, I try to re-upgrade to the same version but upgrade stay block at 0% and led is red. Yesterday I try the same solution with this version : 9.8.0.0.373. But the same error.. Before upgrade all AP work on 9.7.1.0.17 version

824 Messages

 • 

13.2K Points

5 years ago

Bonjour..
ok. if u keep on running into this error on 9.7.1 code then something either wrong with the firmware file you have or hardware itself. Download a fresh copy and then reupgrade it.

upgrade stay block at 0% and led is red - this is something i have seen myself, please try a different browser when u upgrade...

4 Messages

 • 

100 Points

5 years ago

Bonjour :)

I can solve this problem when I re-upgrade to 9.7.1.0.32 Firmware version. Everything i'ts ok now. thank's a lot for your help ! Have a good week end !