Skip to main content

11 Messages

 • 

236 Points

Thu, Apr 16, 2015 5:01 PM

Answered

Why ZD1205 does not work with the ZF7363?

The access point ZF7363 is not connected to the controller ZD1205 (9.10). What to do?

Responses

126 Messages

 • 

2.4K Points

6 years ago

9.10 still supports ZF7363, so it must work. Factory reset AP, than log  to AP through SSH ,  send command: "set director ip xxx.xxx.xxx.xxx" (xxx means ZD IP address, of cause), reboot. Than AP must find ZD. If still unsuccessful, check if it has ZD version software, not SCG version.
This you can check from SSH: "get scg", it will get error if it is software for ZD, and scg setting status if it's SCG version.

11 Messages

 • 

236 Points

5 years ago

Where to get the SSH-settings to access the access point?
port
login
password

82 Messages

 • 

1.2K Points

5 years ago

Hello Andrey,

The Ruckus APs use the standard TCP port 22 for SSH and the default user name is "super" and password "sp-admin" for all the APs unless you change it to something else.

Regards,
Rahul

11 Messages

 • 

236 Points

5 years ago

Nothing helps, what to do?

11 Messages

 • 

236 Points

5 years ago

I changed the firmware on the access point (9.4).Now it works!

5 Messages

 • 

152 Points

5 years ago

Hi!
Try to factory reset the AP and to upgrade it to the new standalone firmware (100.1..).
After it you could connect it to ZD1205 like usual. It should work.

5 Messages

 • 

100 Points

4 years ago

I need original firmware for Ruckus ZF7363. Xeltek SuperPro I loaded machine