Skip to main content

2 Messages

 • 

100 Points

Tue, Oct 15, 2013 6:28 PM

Updating Firmware on ZD1106 ZoneDirector

There has been an issue with our wireless connection dropping. One of the troubleshooting solutions has been a suggestion to update the firmware on our ZoleDirector (which in turn updates the APs). The model is ZD1106 and the Version listed (which I'm assuming is the Firmware version) is 9.4.0.0 build 110. What's the proceduce to do this? Where exactly can I find the correct firmware download? Are there any updates before the latest versiont hat I have to install first?

Responses

368 Messages

 • 

5.6K Points

7 years ago

On the download page you will find Release notes of each FW. In it you will find the upgrade path.

You will find it on support.ruckuswireless.com and you need to have a valid support contract to do this.

683 Messages

 • 

11K Points

7 years ago

Just to be explicit...there is an upgrade path you must follow so this may require multiple upgrades depending on what support asked you to try. This article explains it and pay special attention to the note at the bottom: https://support.ruckuswireless.com/an...

11 Messages

 • 

190 Points

7 years ago

Keith, sorry to jump in here, but why is it when I click that link I get a page that says I need Premium support? I'm a new customer, and paid for premium support.

683 Messages

 • 

11K Points

7 years ago

@slym, this indicates that the support isn't attached to your account. There are unfortunately dozens of ways this can happen. Keep in mind that because we sell through distribution we only have the information provided to us by our resellers and distributors. So if the end-customer information isn't provided with the PO for example, then we don't have a way to associate your account.

If you contact our customer service team ([email protected]) with the serial number of your controller, the sales order (if you have it) and your resellers name, we can knit it all together.

2 Messages

 • 

100 Points

7 years ago

One thing that's a really good idea and will save you time in case of a configuration reset after the firmware update is make sure to back up the current configuration first.

7 Messages

 • 

160 Points

9 months ago

hi guys..
i just updated my zd1106 to newest fw 9.10.2.84..
everything works fine only some client dc since we're using zero it activation..
but i cannot access the webpage on individual AP..ping can are reacheable..even the zd is able to connect to all the ap..but i just cant access the webpage for each AP..