Skip to main content

15 Messages

 • 

272 Points

Sat, May 28, 2016 2:30 PM

Answered

Smart-roam per ap

Can i add smart-roam per ap or ap group

Responses

Brand User

2.6K Messages

 • 

44.8K Points

4 years ago

SmartRoam is applied per WLAN on all APs that advertise/service that WLAN.

It can be used only on your WLAN with Apple clients for example.

Not configurable from the WebUI, the Standalone AP or ZD CLI configuration mode commands are provided in KBA-2277.

https://support.ruckuswireless.com/answers/000002277

You can 'set roam_factor wlanX 3' for typical application benefits, up to a factor value of 5, but is not recommended higher,
although it can be set as high as a 10.

37 Messages

 • 

592 Points

4 years ago

I've been wanting to know if SmartRoam is configurable on a per AP level as well. The commands aren't available when checked on ZD's CLI but I just checked an AP managed by a ZD via CLI. Commands roam_enable and roam_factor are listed when I entered help radiogroup. Does this mean SmartRoam is possible per AP but on a per WLAN as well?

37 Messages

 • 

592 Points

Per AP (but on per wlan and radio) SmartRoam configuration is possible on a ZD managed AP. Just tried it on one of our customers' AP.