Skip to main content

Mon, Jun 18, 2018 12:54 PM

one AP with 3 SSID and 3 subnet

hello,

is it possible to do this ?

I want with one AP (r300) and ZD  1200, have 3 SSID and 1 difféerent subnet.

example:

SSID 1 with  subnet 1

SSID 2 with subnet 2

SSID 3 with subnet 3


and these 3 SSID get ip by the same DHCP server.

between AP and Dhcp server, there is one routeur configure on relay DHCP.


thank's for your help

 

Responses

22 Messages

 • 

352 Points

2 years ago

Yes it's possible, just the port of the access point should be trunk

3 Messages

 • 

90 Points

thank's but the R300 has one port. there is a another parameter for more port ?

22 Messages

 • 

352 Points

This one port should be trunk

13 Messages

 • 

332 Points

2 years ago

In addition to Chbane's comment you will need to assign the VLAN for each SSID by setting it in the Advance Section of  each WLAN.

3 Messages

 • 

90 Points

2 years ago

i assigned the vlan for each SSID but yhe routeur don't receive the query for relay DHCP for the vlan.
thank's for you help
can you say if I forgot one thing

13 Messages

 • 

332 Points

2 years ago

The AP's port is configured as a trunk port, As I mentioned before the VLAN is specified with in advanced settings on each WLAN. Ensure that the port on the router or switch the AP is connected to is configured as a trunk port also (has tagged VLANS applied to it).

Also ensure that DHCP helper is setup correctly on each VLAN.