one AP with 3 SSID and 3 subnet

Question

hello,is it possible to do this ?I want with one AP (r300) and ZD  1200, have 3 SSID and 1 difféerent subnet.example:SSID 1 with  subnet 1SSID 2 with subnet 2SSID 3 with subnet 3and these 3 SSID get ip by the same DHCP server.between AP and Dhcp server, there is one routeur configure on relay DHCP.thank's for your help

chbane_mohamed · Answer

Yes it's possible, just the port of the access point should be trunk

shane_ferguson · Answer

In addition to Chbane's comment you will need to assign the VLAN for each SSID by setting it in the Advance Section of  each WLAN.

cedric_bantignie · Answer

i assigned the vlan for each SSID but yhe routeur don't receive the query for relay DHCP for the vlan.thank's for you helpcan you say if I forgot one thing

shane_ferguson · Answer

The AP's port is configured as a trunk port, As I mentioned before the VLAN is specified with in advanced settings on each WLAN. Ensure that the port on the router or switch the AP is connected to is configured as a trunk port also (has tagged VLANS applied to it).

Also ensure that DHCP helper is setup correctly on each VLAN.

cedric_bantignie

one AP with 3 SSID and 3 subnet

Responses

chbane_mohamed

cedric_bantignie

chbane_mohamed

shane_ferguson

cedric_bantignie

shane_ferguson

Was this helpful?