Skip to main content

1 Message

 • 

70 Points

Mon, Aug 20, 2018 9:34 AM

hi, we try to update zone director firmware from 9.6.1.15 to 9.7.2.0.20.

hi, we try to update zone director firmware from 9.6.1.15 to 9.7.2.0.20. and it doesn't work the zone director does not complete the update and now all device are in disconnected status, we try to reset to factory default and it still doesn't work

Responses

Employee

 • 

305 Messages

 • 

4.9K Points

2 years ago

Hi admin admin,

What is the current status then? if you use the console port, do you get a prompt or nothing at all?

What model ZD you have ? 

regards
Martin

86 Messages

 • 

1.5K Points

2 years ago

Does it state in the logs that the APs aren't supported? Did you try this in Internet Explorer?  You will need to roll it back to 9.6.1, then see here: https://forums.ruckuswireless.com/ruckuswireless/topics/zd1100-err-ssl-version-or-cipher-mismatch

"Adding on here- you can enable SSLv3 on Internet Explorer.  If you do, make sure to add the site to the compatibility view list or upgrading the ZD from IE will corrupt the firmware."