We have two zone directors, our production ZD3000 with all APs and a test unit ZD1200 (0 APs at the moment). There appears to be an area that it is impossible to reach with standard cabling which would be a prime place to try a meshed AP as there is power there. My question is, if I enable mesh on my ZD1200 will that affect anything with my production appliance given that they are on the same vlan? All APs are associated with the 3000 and do not have the 1200 as a failover etc. This seems to be a no-brainer, but I do not want to find out I'm wrong.
My plan would be to pull one of the wired APs from the 3000 onto the 1200 and then mesh it with the new AP.
Thanks in advance.