Skip to main content

1 Message

 • 

80 Points

Wed, Nov 16, 2016 4:19 AM

Answered

Cant find ZD1200 on network after resetting

We cant get back into our ZD1200 after resetting. Tried 192.168.0.2, the old ip address, and any ip address in the dhcp range. Any ideas how to get in?

Responses

1 Message

 • 

62 Points

4 years ago

301 Messages

 • 

4.8K Points

4 years ago

Hi Martin,

Normally when there is a DHCP server in the network segment which the ZD can reach it will get an IP Address from it.
As you have checked that, please use the alternative way, which is the console cable.

Kind regards
Martin

20 Messages

 • 

382 Points

Or lease an IP for the ZD's MAC Address on the DHCP's configuration and use that IP.

2 Messages

 • 

70 Points

4 years ago

Hi all,

I have the same question.

I can enter the command prompt using console cable. But failed to connect to the web access page after resetting too.

I couldn't find the on network place too.

Please see if there is any idea on it.

Thanks a lot.
Brand User

2.6K Messages

 • 

44.8K Points

4 years ago

ZoneDirectors support UPNP - Universal Plug and Play. 

Your Windows Explorer 'Network' view should display the ZDs at whatever IP they have now.

If you have Console access, login, go to Enable mode, and issue "show sysinfo" to display your ZD's name,
IP and MAC address, model, uptime, etc.

2 Messages

 • 

70 Points

4 years ago

Thanks for the reply.

The icons didn't show up for the UPNP..... even I enabled the network explorer option.

For CLI, the info can be shown like IP and so on... and it's already the default IP as in data sheet.

Thanks a lot.