apple+cant+connect+to+SSID

Hi Marco,
Can you check if the SSID is using AES (and not TKIP or mixed).
Apple is not supporting TKIP.

Kind regards
Martin

And 9.5.0.0 156 was the GA release too.  Available for ZD5K, ZD3K, ZD1100, and ZD1000 controllers.

Any APs you are using on 9.5 GA today, are also supported on all those controller platforms up to
version 9.5.3.0.44 MR3, or up to 9.6.2.0.13 MR2, 9.7.2.0.9 MR2, even 9.8.3.0.14 MR3 (unless you
have 2942 model APs).

Please consider discussing with your IT team, about scheduling a change management period
to perform an upgrade to your ZoneDirector (and all APs) firmware.  You might contact TechSupt
to get further pointers, like disconnecting ZDs from the network while upgrading, as APs will re-join
and upgrade to whatever version the ZD is on when you're done.

If you have a support contract, you can download the controller firmware versions you need, and
please read the 9.8.3 Release Notes,

https://support.ruckuswireless.com/documents/814-zoneflex-9-8-3-mr3-release-notes

It's Upgrade path says you need to be on at least 9.6.0.0.267 GA from your 9.5 current version, so
you would need at least two upgrades.

https://support.ruckuswireless.com/documents/277-zoneflex-9-6-ga-release-notes

Official 9.6 upgrade paths supported:
• 9.4.2.0.29
• 9.4.3.0.12
• 9.5.0.0.156

You can upgrade from your 9.5 to the 9.6.0.0.267 GA version and then upgrade to 9.8.3.0.14.

I can say that 9.8.3 is likely more Apple friendly and would have the most enhancements, than
previous versions.  Enable 802.11d country code in IE is something else about Apples that I recall.
Good luck and best regards.