VLAN Configuration question for wireless network
This is my setup.
HP Procurve 2530 SWITCH on 192.168.1.2
User VLAN: 20
Public VLAN: 30
Ruckus ZD1100 controller with 6x 7363 Access points with 2x SSIDs one for each VLAN.
Ports on the switch
1-10 tagged (ZD100 wireless controller and 6x 7363 access points are plugged in here with static addresses from 192.168.1.11 to 17
11-40 Untagged VLAN 20 – user router plugged in with DHCP 192.168.1.x
41-48 Untagged VLAN30 – public router plugged in with DHCP 192.168.2.x
When testing, i cannot connect wirelessly to the user SSID, doesnt get an address from DHCP. This configuration doesnt appear to work, what am I doing wrong?
If I place all the wireless kit on VLAN10 it will probably work fine, but I have been told to set it up as above.