R

Thu, Aug 26, 2021 8:00 PM

xCAT: flash_get_next_file_in_dir: Failed to get stat of

hi!!

I have an icx7150 managed with cloud service and has the following problem

in order to boot the device, i need to connect with the console cable.. and hit enter... (the system is waiting for it, and wont boot unless i connect)

if I run the show config I get this

INFO: empty config data in the primary area, try to read from backup

If i try to write the current configuration.. i get the following

Telnet@ICX24P(UNO)(config)#write memory

 There is no startup config file, unable to save legacy config 
flash_fcreat: Failed to create file startup-config.txt
Error - failed to create startup-config.

Copy Failed.

If i do a "show files"

i get this

telnet@ICX24P(UNO)(config)#show files
Type       Size   Name
----------------------
F        33554432 primary
F        32946920 secondary
xCAT: flash_get_next_file_in_dir: Failed to get stat of /fast_iron//primary.sig
F             812 startup-config.backup
xCAT: flash_get_next_file_in_dir: Failed to get stat of /fast_iron//startup-config.txt
F          162204 poe-fw
xCAT: flash_get_next_file_in_dir: Failed to get stat of /fast_iron//icx_dhcp_snoop.db
F            1576 $$ssh8rsahost.key
F             256 secondary.sig

66666200 bytes 6 File(s) in FI root

1039908864 bytes free in FI root

****************************

******************************************

is there something wrong with the flash memory? 

Employee

 • 

183 Messages

 • 

3.2K Points

2 m ago

Have you reloaded since you have seen this issue?

I have not seen this specific item, but I would recommend opening a case to get it looked at. Please see my signature. 

2 Messages

 • 

80 Points

@ben_beck  No i havent reloaded.. 

im reading the documentation from "reload", the icx is a single unit.. 

Important Announcement