TOPICS
NEW POST
SIGN IN
5 Messages
•
110 Points
Thu, Dec 3, 2020 3:46 AM
After installing ova on vsz5.2.1, use the command, show service, prompting all services are down , what should be done
Like
Comment
Follow
6 Messages
60 Points
2 months ago
Hi there, it usually take about 30-40 mins for all services to resume. If it is taking longer than 1 hour, something is wrong :)
(edited)
I have noticed that once you complete the firmware upgrade, first thing resume is ICMP. If you can ping it, you can SSH into vsz and wait for services to be resume. I would wait for all the services to resume before proceeding further. 30-40 mins minimum.
Official Rep
312 Messages
4.9K Points
After installing? did you run setup? and configured the vSZ?
regards
Martin
I have run setup, and there is this prompt
2 Messages
70 Points
Hi paresh_patel_37e4f4,
when you install the .OVA file you need to run setup as Martin said. After that you can access the GUI from management IP for 3 interfaces vSZ or the vSZ IP if a single interface. Then you need to continue the configuration as create/join cluster, country, etc. After this It will take some time to install the software, and only after this step you will be able to see services on CLI.
Thanks.
David.
a month ago
After installation, the setup and management address have been set, but now the WEB management page cannot be accessed using this address
Hi
The correct address would be
https://172.31.25.96:8443
Please check the QSG (Quick Startup Guide) and the Administrator Guide.
Kind regards
Use port 8443 to login successfully. Thank you
How can we improve?
