Skip to main content

16 Messages


290 Points

Thu, Dec 13, 2018 7:44 AM


M510 and Zone configuration (SmartZone)

If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is not possible (no-tunnel, no-dhcp/nat).
The move is only possible if every SSID is configured with tunnel or dhcp/nat.

Would be nice to be able to move the M510 if there is one SSID with tunnel or DHCP/NAT.


No Responses!