Skip to main content

11 Messages

 • 

282 Points

Mon, Dec 28, 2015 7:50 PM

Is there an SNMP trap in the SmartZone MIB that will show the number of connected APs?

I am trying to configure PRTG to monitor a network and would like to see the total (count) number of APs currently connected. Also, is there a way to show total of Mesh APs and total of RAP?

Responses

Brand User

2.6K Messages

 • 

44.8K Points

5 years ago

Looking at the OIDs in our SNMP MIBs, ruckusZDWLANAPInfo -> ruckusZDWLANAPTable -> ruckusZDWLANAPMeshType  (1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.20) can tell Root AP from Mesh APs.

And ruckusZDWLANAPMeshHops (1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.19) can also identify MAPs from RAPs.



ruckusZDWLANAPInfo    

ruckusZDWLANAPTable  

ruckusZDWLANAPMacAddr1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.1

ruckusZDWLANAPDescription1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.2

ruckusZDWLANAPStatus1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.3

ruckusZDWLANAPModel1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.4

ruckusZDWLANAPSerialNumber1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.5

ruckusZDWLANAPUptime1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.6

ruckusZDWLANAPSWversion1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.7

ruckusZDWLANAPHWversion1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.8

ruckusZDWLANAPIPAddrMode1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.9

ruckusZDWLANAPIPAddr1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.10

ruckusZDWLANAPNumRadios1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.13

ruckusZDWLANAPNumVAP1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.14

ruckusZDWLANAPNumSta1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.15

ruckusZDWLANAPNumRogues1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.16

ruckusZDWLANAPConnectionMode1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.17

ruckusZDWLANAPMeshEnable1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.18

ruckusZDWLANAPMeshHops1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.19

ruckusZDWLANAPMeshType1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.20