AP don't join to vSZ on 3.5.x.

Question

Hi.Some APs don't join to vSZ on 3.5.x.I captured packets between Ap and SZ.It shows 'encrypt alert' same as below again and again.I have also tried it at another vSZ.It happens same.Anyone exprienced?Regards.

ramesh_goud_guniganti · Answer

Have opened the Ports on Firewall

hyosang_choi · Answer

AP and vSZ is located on Routing path without FW.Because we tested it on vsz-E, it have no staging-zone.

ramesh_goud_guniganti · Answer

All those AP's are Hard reset? if not do hard reset.

martin_martin_6778240 · Answer

What version software is running on the AP?can you ping the vsz when you logged into the AP?regardsMartin

hyosang_choi · Answer

vSZ version is 3.5.1.0.296.AP's version which join to vSZ is 104.x and 9.13.x.Ping is good.I'll update futher info after another test.

martin_martin_6778240 · Answer

So for 104.x you need to use Set scg ip x.x.x.xand for 9.13.x lwapp2scg needs to be enabled. Although i suggest you to load 104.x.x.x code to the AP .Kind regardsMartin

hyosang_choi

AP don't join to vSZ on 3.5.x.

Responses

ramesh_goud_guniganti

hyosang_choi

ramesh_goud_guniganti

martin_martin_6778240

hyosang_choi

martin_martin_6778240

Was this helpful?