Applications data reporting on SCG 200 v3.4

Question

Hello there,Is application data reporting supported on SCG? Below is the current version of our SCG planes and our SCI version 3.6.0 - The application report is blank not sure if it is a configuration issue or a firmware version issue.. Controller Version 3.4.1.0.208Control Plane Software Version 3.4.1.0.38Data Plane Software Version 3.4.1.0.59Kindly assist.Regards,Themba

monnat_systems · Answer

when you are referring to application data report, are you talking about  'Application Recognition and Control (ARC)'...??I am using 3.6.0.0.510 Vsz, i can see this feature but no reporting in it

lakshmi_nagarajan · Answer

Hi Themba, application data is supported in SZ 3.4.1. Please check if "Enable SCI reporting" is checked on the controller and the SCI details are provided there.

Also please ensure that port 1883 is open on SCI for incoming traffic.

Thanks
Lakshmi

marcus_burton · Answer

Also, application reporting is not supported in SCG200 in 3.4.1. It is first supported in 3.5.x releases (it is supported on SZ100/vSZ-E in 3.4)

If your product supports app recognition, it must be enabled at the WLAN level. If you don't have it enabled there, then you will not find data in SCI.

thembelani_ncube_9cza0jn6v0v0u

Applications data reporting on SCG 200 v3.4

Responses

monnat_systems

lakshmi_nagarajan

marcus_burton

Was this helpful?