Official

Accepted

Unanswered

Advanced Filters

Search Results (59)

Activity
AP-SCG does not activat the WLAN-RADIO / new installation of a SmartZone Essential

I am trying to do the migration from an ZD1200 to vSN-e. Therefore I have now two R510 in a test-enviroment connected to an brandnew installed vSN-e (I do not use the automatically migrating-service by vSN-e!!).I do have the problem, that the two R510 do not activate the WLAN-RADIO. I have successfu

Question

 • SmartCell Access Points

57

5

vSZ HS and disabling 2.4ghz on an SSID

I can't seem to figure out how to disable 2.4ghz on a SSID. All other posts seem to talk about the ZD and they don't seem to be the same. vSZ is running 3.5.1. If we create the WLAN group and then create the AP group, there doesn't seem to be a way to disable 2.4 in the AP group. Is it CLI only? Hel

Question

 • 

Answered

 • SmartCell Access Points

756

12

AP Name incorrect

I have many sites on two different vSZ-H controllers. Two sites only show this problem: I rename APs using the "Access Point" configuration menu. When I switch to "Monitor APs" these APs show AP Name as "MyRouter". If I go to the "Configuration" menu again, the APs show the names I gave them. Th

Question

 • SmartCell Access Points

19

2

0

P300 is it VLAN passthrough?

Team, May I ask, if the P300 is connected to a switch trunk port, likewise with the other P300, does it passthrough all the configured vlan's? Regards, Jes

Question

 • SmartCell Access Points

30

1

0

GRE / Centralized Forwarding MTU - Jumbo frames?

Hello,We run a sparsely distributed WiFi hotspot network on our own infrastructure which supports frame sizes beyond 2000bytes in all network segments.Currently we are dependant on using the "Tunnel WLAN traffic through Ruckus GRE" feature but aren't able to set the Tunnel MTU past 1500 or Auto as p

Question

 • SmartCell Access Points

113

2

Configuration AP R320

I have a AP R320 and try to configure following the Quick setup guide, but in the step 5 when used de web interface (Edge, Mozila, Crome), they do not access to de AP and do not appear the Admin login menu.

Question

 • SmartCell Access Points

132

1

0

5 GHz / 2.4 GHz

hi, please tell me how to enable only 2.4 GHz in ZoneDirector for a certain network. and for another 5 GHz?

Question

 • SmartCell Access Points

24

1

0

How many entries can I add to ACLs on SZ100?

I have a project where customer says that he needs:1. MAC authorization in WLAN;2. ACL entries number should be more that 8k.I can't find in docs what is the limit of ACL entries number for any type of ACL (l2, l3/l4). So — how much MACs can I use to authorization? How much MACs can I add to ACL on

Question

 • SmartCell Access Points

223

5

Custom login form to authenticate with Ruckus smartzone & hotspot

Trying to follow this example (https://docs.arris.com/bundle/sz-510-WISPrPortalReferenceguide-sz100,vsz/page/GUID-0C63DD21-399E-43DF-BBAA-E860A2A1BD13.html) but stuck as getting the users "Mac address". Does anyone know of a way or programing language that can retrieve this. Does anyone have an exam

Question

 • SmartCell Access Points

33

0

Migrate SZ-124 IP to new subnet (with some APs offline)

Hello,We have a production SZ-124 we need to move from an old network to a new segment.  From other posts I've read the best way to do this is to run an AP CLI script to "set scg ip " on all the APs before you change the controller's management IP.We also plan on updating the DNS entry used for disc

Question

 • SmartCell Access Points

7

0

SCG/SZ AP CLI Script to get info for all APs

I have a need to audit the uplink interfaces for all APs on a monthly basis for PHY link speed (100M, or 1Gbps).Support told me that the only way is to manually check every single AP individually via the GUI or with the CLI command below.# remote ap-cli "get netstats "I was wondering if there was s

Question

 • 

Answered

 • SmartCell Access Points

201

2

What is the minimum standalone firmware version to connect AP to vSZ

How can I find minimum AP standalone Firmware version required to connect AP to vSZ 5.1

Question

 • 

Answered

 • SmartCell Access Points

153

3

Is it possible to select which SCG node we can perform the firmware upgrade?

Is it possible to select which SCG node we can perform the firmware upgrade? We are running a 2 node SCG200 and wanted to know if it's possible to select the node to perform an upgrade.

Question

 • 

Answered

 • SmartCell Access Points

18

3

Decreased battery life on company WiFi

our mobile phones have a decreased battery life, when they are in the company wifi. if they are off the company wifi or in a wifi in the employees homes, battery life is normal.we are using vSZ with R700/R710 APs. are there any settings we could try?

Question

 • SmartCell Access Points

191

6

how to change the APs ip setting to static quickly

Hi guys,i want to  changed the APs' ip setting to Static in sz100, but I have more than 300 ap, if any method such as script file  to do this quickly?

Question

 • SmartCell Access Points

427

2

AP firmware 3.6.0.0.709 High Connection Errors

I have upgraded my Vsz to 3.6.0.0.510 and upgraded the APs to 3.6.0.0.709.  After the upgrade i noticed that almost every AP had a high percentage of connection errors.  I let it go for several days and thought i still had a lot of clients connected so it must be working.  In the events I see a lot

Question

 • 

Answered

 • SmartCell Access Points

117

19

configuration hotspot(WisPr) local in VSZ-High

Hi,I'm setting up a Hotspot on the Virtual Smart Zone - High 3.2 ruckus platform. For this I turn to AP Zone >> Hotspot (WISPr) PortalI would like to try the Hotspot portal locally. I make the configurations as they are:AP Zone>>WLAN Services & Groups Authentication Type: Hotspot (WISPr)Hotspot (WIS

Question

 • SmartCell Access Points

13

1

We can connect to SSID , but unable to connect to the Internet.

Sometime,We can connect to SSID ,but unable to connect to the Internet (some people will happen )Ruckus R500*120 ZD1200*1  (Version: 10.1.0.0 build 1515)Can't see error message from LOG when a problem occurs.

Question

 • SmartCell Access Points

175

2

How to disable Reset button on APs ?

Please advise if its possible to disable the reset button option mainly of H510 AP and dhow We want this for extra security and to avoid guests reseting APsI have searched the forum - and found nothing specific - hope I didnt miss somehting.

Question

 • 

Answered

 • SmartCell Access Points

39

3

Batch Provisioning for APs with Virtual SmartZone

Is there any more detailed documentation available for batch provisioning of AP's with the Virtual SmartZone?   The (very brief) mention of the feature in the administration manual mentions that you can export a blank file with headers (so far so good) but doesn't describe any of the columns and doe

Question

 • 

Answered

 • SmartCell Access Points

212

4