Official

Accepted

Unanswered

Advanced Filters

Search Results (2.2K)

Activity
Ruckus Unleashed R750 APs losing link with Ubiquiti Edgerouter 12--switching ports on EdgeRouter solves problem

Hi, everyone. I am using two R750 APs in Unleashed version 200.8.10.3.278, with both connected to a Ubiquiti Edgerouter 12, powered by Cudy POE300 60W Gigabit Ultra PoE+ Injectors. The system is performing well, but after some time, the APs lose link with the Edgerouter. Edgerouter port lights ar

Question

 • Access Points

30

3

0

Desconfiguracion de R320

Hola, amigos les tengo una consulta,estamos implementados varios equipos R320, a los equipos previamente se les coloca la IP de la controladora con el comando "set scg ip x.x.x.x" Los Sw (diferentes marcas) donde se conectan los Ap son POE, en su mayoría pasa que cuando se los conecta los R320 pi

Question

 • Access Points

8

2

R550 standalone operation

Will the 901-R550-WW0 operate standalone without unleased software or a cloud service?

Question

 • Access Points

12

1

0

Not enough electricity power provided with AP warning ?

After upgrading to Unleashed 200.8, my PoE switch powered R610 showing "Not enough electricity power" warning ? I am sure my PoE switch can provide both 802.3af and 802.3at power output and my R610 works well with both 2.4Ghz and 5Ghz SSID running. any idea ?

Question

 • 

Answered

 • Access Points

2.4K

13

Official Solution

Streaming to two IPTVs via ETH from a H510

Good day all, I am trying to find a solution for a site requiring IPTV with too few data points. Is it possible to stream to two IPTVs via the ETH ports on a H510? I am not sure if the AP will be able to handle the load. Regards Migael

Question

 • Access Points

24

2

0

Ruckus R510 connection refused after factory reset

Hello, I have a couple of APs that have come back from an installation and after a factory reset (pushing the button), I have no way of connecting to a configuration interface (neither HTTP, HTTPS nor SSH). I see connection refused in the browser and in PuTTY. However, I can see - the AP get

Question

 • Access Points

18

1

0

Unable to connect to system - two r510 APs with ICX-7150 switch

We've had this system for a few years and it went out. Can't connect to the networks we set up. This has happened once before and ruckus helped set up remotely a couple years back but reaching them by phone has been nearly impossible. Cannot access admin interface via app nor url so cannot check

Question

 • Access Points

25

1

0

Accepted Solution

Ruckus Indoor AP R610 R510 R650 etc. have some problem with Apple M1 mac

I'm M1 Air users, and while using WiFi connection my air will disconnect randomly.I have 2 workspace , one space have lots of APs (R610)in this case my air will disconnect randomly. another space only have 1 AP, but did not occur disconnect. Anyone have simliar problem?

Question

 • Access Points

394

11

0

No connectivity for a few seconds after connecting to WiFi

I have 3 Ruckus APs (720, 710, 510) connected to a switch, which is connected to a router/DHCP server/DNS server. When connecting a client device to the WiFi network, there is a short period of time (1 to 2 seconds) immediately after the WiFi connects where the client is unable to reach the netwo

Question

 • Access Points

46

3

0

Accepted Solution

Unleashed Firmware Upgrade option frozen (200.7.10.202.94)

Hi, I'm trying to update the firmware on my unleashed network, however when i go to the upgrade page the screen just hangs as per image below. the button is non-responsive.  All the devices are on the same firmware version (200.7.10.202.94).  I've tried shutting all the devices down at th

Question

 • Access Points

73

3

0

Does R750 support LACP?

Dear support,please help check if ZD1205 +R750 support below or not, thanks.1. Does R750 support Link Aggregation?2. Does R750 support LACPNok

Question

 • 

Answered

 • Access Points

388

8

Ruckus R710 with unleashed but showing no AP

Hello, I have recently purchased an R710 on Ebay ( I have about 4 of these now and 2 T710's) I've had no issues in the past configuring my AP's but this one seems to be causing me quite a bit of trouble.I had to connect via ethernet and SSH into the R710 to be able to upgrade the firmware to unleash

Question

 • Access Points

226

8

What is the password for configure.me ssid after factory reset on R510?

I have an R510 that was originally Unleashed, then flashed to run on my Cloud WiFi network and have now removed the unit from the network.  I'd like to flash this back to Unleashed and have done a factory reset by holding the reset button for 10 seconds.  I now see the configure.meXXXXX SSID but it'

Question

 • 

Answered

 • Access Points

12.3K

11

Ruckus T710

Hello all, so I have the Ruckus T710 with me and for the life of me I can get it to ping the default IP. I’m a little bit of a newb in this sector but my current setup is I have the ruckus plugged into a 48V POE adaptor that’s linked directly the computer. When it powers on, it gives me

Question

 • Access Points

40

2

0

2 R310s systems not roaming from one AP to the other

Hello, I have 2 APs one in my office, and one in my bedroom.   They are set up in an unleashed network and running R310_200.1.9.12.62.    Once they attach to the network they get about 460 for network speed.   When I walk to the bedroom - even after being in there 5 minu

Question

 • Access Points

40

1

0

block a client

Hello. I have a couple of zone director 1200 in Smart Redundancy configuration and about 50 AP. We would like to block a supected client from our wi-fi enviroment. We have the mac address of it but after it leaved the wi-fi, we don't see it on active/non-active client list of ZD1200, for this I

Question

 • Access Points

22

1

0

Do the R510's support antenna's - need external antennas

Hello, I have a warehouse with about 30 R510's.  I need to put two APs in heating boxes designed for APs - they get power from POE to keep the units warm.   My guy has used Aruba's in the past that support antennas which attach to the units and stick out of the heating boxes. 

Question

 • Access Points

26

2

0

New firmware 200.9.10.4.202 with issue

Hi,I just updated my r610 unleashed with new firmware 200.9.10.4.202. After that my URL filtering starts not working properly.Example: I am using youtube safesearch for childrens SSID, cultural videos are showing in the search but I can't play them.This happen after upgrade to new firmware.

Question

 • Access Points

223

3

Ruckus R720/R710/R610 Unleashed half speed download

Dear Ruckus, I have invested enough money to get fast and seamless internet on my APs. Not only did I recommend Ruckus Unleashed to many of my friends who wanted a fast and stable internet connection, and they also bought your points. But it is not, stable - yes, seamless - rather yes, fast - no. I

Question

 • Access Points

514

9

R710 and Cloud

Hi All, I have Two R710 and Cloud account. Recently R710, disconnecting(heart beat lost) and another R710 is connecting to cloud at all. Kindly suggest me which firmware will work for Ruckus cloud. R710 firmware and cloud versions mentioned below. R710: 114.0.0.0.6565 Cloud Version:21.06

Question

 • Access Points

16

1

0