Official

Accepted

Unanswered

Advanced Filters

Search Results (8.2K)

Activity
How to access factory default config files.

How do you access factory default config files ?  The application is for an end user that has changed the settings and needs to change them back to the settings that we set for them not the default ruckus has set by pressing the reset button on the back of the unit.

Question

 • Access Points

29

2

access-list 'established' not working properly in 09.0.10

Configuration snippets: vlan 80 name untrusted by port untagged ethe 3/1/3  ip access-group untrusted in interface ve 80 ip address 192.168.80.2/24ip access-list extended untrusted enable accounting  sequence 10 permit tcp any 192.168.0.0/16 established sequen

Question

 • Switches

26

2

Accepted Solution

Move Ruckus (unleashed) AP originating traffic from native 1 vlan to 'management' vlan.

Hey Folks, I'm trying to phase out vlan1 from an existing deployment. It currently consists of 4 h510 APs and an ICX6610. Like OP on Dec 16 "Change Unleashed to be able to use VLANS",  I'm looking to clean-up.  I've created 6 VLANs to service the separate user roles (10,20,25,30) an

Question

 • Access Points

45

5

0

Difference location AP's connectivity at central location WLC.

We want to add Ruckus AP on ZD1200 from head office to branch office. The WLC (ZD1200) setup on head office some AP's are setup at branch office. Now we want to control all AP's from head office WLC. 

Question

 • ZoneDirector

32

4

0

Accepted Solution

Correct way to enter negative time-offset in DHCP server?

The 'option time-offset' command for the IPv4 DHCP server indicates that it accepts a 'signed integer representing the number of seconds offset from UTC'. I'm in America/New_York, so this value is "-18600".However, 'option time-offset -18600' generates an error saying the input is invalid. 'option t

Question

 • Switches

37

3

http://training.ruckuswireless.com link is not working

trying to log on the : http://training.ruckuswireless.com and getting an error message, is there a known problem or a different link/way to log in to the training page?' thanks

Question

 • Community & Online Support Services

21

1

0

vSZ-H change description clusternode

Hi All, We want to change the description of the Nodes in our cluster. Not the the clustername or name of the node, just the desciption field of the node. Somehow i can't find it where to change it. Regards, S

Question

 • SmartZone (SZ) & Virtual SmartZone (vSZ)

22

2

0

Accepted Solution

Setting Up New Lennar Home System

Setting Up New Lennar Home System Hello experts, I just moved into a Lennar home with a Ruckus ICX-7150-C12 switch, and three Ruckus R510 WAPs. I have tried following the phone app instructions from this video, and using my laptop and this video, but haven't been successful. I have ran into sever

Question

 • RUCKUS at Home

4.9K

16

0

H510 Unleashed won't work

Hi i got one h510, recently i flashed unleashed firmware into it, but it just won't work. there are two situtation1 , when there is already one unleahsed network there, H510 won't join the current one, always shows "building the unleahsed network, it may take a few minutes" 2, when there has no unle

Question

 • Unleashed

85

3

0

wifi call on ZD1200

Hi all, We are using a ZD1200 with firmware 10.4.1.0.238 but I don't see an option to enable wifi calling. When will this feature be supported? (It's already present on unleashed and I believe smartzone?) Thanks!

Question

 • ZoneDirector

190

3

0

ICX 7250 LACP Blocked

We have had this incident yesterday where multiple LAGs went down across multiple switches. All LAG scenarios are between 7450 and 7250 switches. LACP ports were blocked and nothing showed up in the system logs. Tried bouncing the ports, resetting the LAG on 7450, but it didn't help. I couldn't perf

Question

 • Switches

31

2

Accepted Solution

How to achieve Band steering on ZD1200?

Hi all, I have a question that how can we push users connecting to 5Ghz first but not 2.4 radio? I just reviewed other brands like Aruba / Aerohive, they just have a feature named Band steering to achieve this. Can Ruckus do well the same as well? I also find that Ruckus supports Band b

Question

 • ZoneDirector

60

1

0

Validations to be considered before upgrade activity on Smart zone/Virtual smart zone

In this self-help discussion, I will explain the precautions that needs to be taken before planning for an upgrade activity. There can be many reasons for an upgrade failure to occur during the upgrade activity. It can be a network related issue/it can also be a hardware related issue. Firstly,

RUCKUS Self-Help

 • SmartZone (SZ) & Virtual SmartZone (vSZ)

19

0

0

does anyone ever see this warning : "AP 80211 DOS mgmt flood" and how to resolve this?

does anyone ever see this warning : "AP 80211 DOS mgmt flood" and how to resolve this?

Question

7

3

R500 Member not connecting to the master ?

R500 has been unleashed and is the master , no members show up , ive located them in the ipscan and i can log into them but they do not show up on the dashboard  

Question

 • Unleashed

32

3

0

ICX 08095e和ICX08095f版本发布,来看看解决了哪些问题

ICX 08095e & 08095f版本主要说明摘要 没有新增功能 缺省开启SSH。缺省用户名和密码. super/sp-admin 解决的主要Bug问题: 08095f解决的主要Bug问题 FI-250749:After adding and executing batch file, the standby unit reloads unexpecetdly. FI-250969:Upgrade from 8090 to 8095 and ICX will be losing connectivity to devices whose

Question

 • China – 简体中文

7

0

0

ZoneDirector 10.5.1.0.124版本发布

ZoneDirector 10.5.1.0.124 版本说明主要摘要 新AP支持:H350,T350se 版本升级突破了原来N-2的限制,可以直接从如下版本升级:1.0.0, 10.1.1.0, 10.1.2.0, 10.2.0.0, 10.2.1.0, 10.3.0.0, 10.3.1.0, 10.4.0.0, 10.4.1.0, 10.5.0 增加了Wi-Fi6 Disable的按钮 配置变化记录:记录GUI界面,命令行等配置的更改,追踪配置更改 解决了DNSmasq安全问题 解决问题 解决了WLAN配置中“Block client" 选项无效的问题[

Question

 • China – 简体中文

12

0

0

Ruckus Unleashed WPA3-Enterprise with Local Database

I have Ruckus unleashed setup at home Currently i use 802.11 authorisation and use WPA2/WPA3 encryption Unfortunately, all my wireless clients connects with WPA2 encryption I can use WPA3, but with open autorisation.  When i try to switch wpa3+802.11 -i can't use local user database (only

Question

 • Access Points

46

2

0

2022年网络技术趋势

2022年1月19日上午11:00,我们就将举行新年第一场RTF网络研讨会。新冠肺炎流行后的工作场所继续发生变化,远程工作员工间的协作正在加速数字化转型,每个企业需要跟上时代的步伐才能取得成功。 本次网络研讨会,我们将探讨5个关键网络技术趋势,这些技术趋势将塑造2022年的网络行业和市场格局: 分布式企业室外无线扩展网络基础设施更新增强园区网体验ACX和微服务Micro-servicesIoT物联网扩展请大家踊跃注册参会,报名注册链接:https://teams.microsoft.com/registration/gS9HMeSP7EmLw_ocKVZA1w,A7-Fc8hLGUK

Announcement

 • China – 简体中文

4

0

0

Accepted Solution

Controller ZD

Hello, I am new to Ruckus I would like to know if it is possible that a ZD controller can control another ZD.

Question

 • ZoneDirector

29

1

0