Official

Accepted

Unanswered

Advanced Filters

Search Results (8.2K)

Activity
Ruckus ICX AAA

Hello, I have configured Authentication/Authorization on my Ruckus ICX 7150 swithes via AAA (Tacacs+(Cisco ACS)). Authentication/Authorization works fine via SSH, but as I have discovered console doesn't work anymore. I connect the cable to console port but nothing happend   Here is my confi

Question

 • Switches

5

0

0

SZ API query for specific attributes

I am trying to get some information using the API. The URI is /wsg/api/public/v9_1/query/ap If I POST { "filters": [ { "type": "DOMAIN", "value": "blah" } ], "attributes": [ "*" ] } then it returns all information, but if I do { "filters": [ { "type": "DOMAIN", "value": "blah" } ], "attribute

Question

 • SmartZone (SZ) & Virtual SmartZone (vSZ)

43

1

0

Migration from SZ-100 to vSZ-E

Hello everyone, we are using a SZ-100 on 5.2.2.0.1161 and we want to migrate to a vSZ-E. I already found some helpful posts regarding migration with Switch-Over Cluster function, but i was wondering if an easier way would also be possible. This would be my desired procedure: 1. Install a vSZ-E

Question

 • SmartZone (SZ) & Virtual SmartZone (vSZ)

12

1

0

Accepted Solution

ZD1200 Firmware upgrade Fail

Hi, I have a ZD1200 running Firmware 10.3.0.0.398 None of our computers would connect to it and figured it was a TLS issue.  So found an older machine and now I can get to the GUI.  I am hoping that a newer firmware release has resolved this issue with the built in web server.  I

Question

 • ZoneDirector

12

2

0

standalone, unleashed, controller base firmware speed difference

hello,i have question about Speed difference by firmware type of all APsfor exmaple i tested R550 AP standalone firmware 1. standalone , DHCP/NAT2. unleashed , DHCP/NAT3. controller base firmware and AP DHCP/NATstandalone DHCP/NAT test speed is slowestbut standalone bridge mode is fineis other APs s

Question

 • Access Points

102

2

R510 AP Setup Issue

I'm setting up a Ruckus R510 for someone else, and following the quick setup guide hasn't worked. After plugging it into a PoE  port and directly to the computer, pulling up the default IP doesn't load. This was tried on multiple computers with different versions of windows, each time following the

Question

 • 

Answered

 • Access Points

1.8K

4

acces point R300

I can log in after hard reset with 192.168.0.1 and can enter the name ( super ) and password ( sp-admin ) after that the page stays blank? With refresing sometimes the nam of the device pops up but that is it! Anyone a solution?

Question

 • Access Points

30

3

0

(code 2) Failed in association procedure

What does this mean? I am using a R510 with unleashed. Not sure what I did or if anything. I cannot surf the internet when connected to AP but the unleashed site shows connected to internet.

Question

 • Unleashed

14

1

0

Accepted Solution

Standalone to Unleashed

Hi all, I just upgraded from standalone to unleashed on my R310 (R310_200.7.10.202.121) I understand the https://unleashed.ruckuswireless.com/ portal should be accessible but i cant see it, i'm using Cisco Umbrella which changes my local DNS to 127.0.0.1 as i'm using the roaming client, this gives

Question

 • Unleashed

168

3

0

How to reset entire Unleashed network for reconfiguration or gaining the access to Unleashed management, if access is lost?

In this self-help discussion, I will explain how we can reset Unleashed network (mainly customers having more than 1 AP in Unleashed network). This may require when customer doesn’t know the access credentials for admin web console due to change in ownership of the device or lost password due to an

RUCKUS Self-Help

 • Unleashed

185

1

Accepted Solution

Firmware upgrade

I have tried twice to upgrade the firmware on my R510. It is currently running 200.10.10.5.253 and I want to upgrade to 200.11.10.5.195. I am performing an online upgrade. It appears to flash properly but once the AP is rebooted it tells me to downgrade to 200.10.10.5.253 which I am able to d

Question

 • RUCKUS at Home

45

4

0

Saving config change on indivdual AP in mesh setup

Hi, I was hoping to change the default vlan on some of my AP's that have cameras directly connected to them but as I've seen in other posts this isn't available at least in the unleashed version I'm using (200.7) But I've figured out if I login to the individual AP's I can change this via the

Question

 • Access Points

11

1

0

How to prevent "looking for printer" on Unleashed

I have several R510 AP with Ruckus Unleashed. I also have an HP wireless printer (HP5255).  Usually, the printer works well on the network, but I often get a message on any of my Macs that says "looking for printer."  I have to delete and re-add the printer, and then it works again. Accor

Question

 • RUCKUS Unleashed

20

2

0

Accepted Solution

Looking for a compatible WiFi Power Plug

Hello everyone, i am looking for a compatible Power Plug which can be used in a Ruckus Environment. Already tried one from SmartLife but it will not work. Does anyone have a recommendation? Regards Peter

Question

 • Access Points

19

1

Accepted Solution

Official Solution

New firmware, old bootrom

Hello, I did an upgrade ICX7150 to SPS08095e to a few switches but the old bootrom remained on some of them. telnet@ICX7150#show flashStack unit 1: NAND Type: Micron NAND 2GiB (x 1)  Compressed Pri Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)  Compressed Sec Code size

Question

 • Switches

51

3

Accepted Solution

R500

Hello,I am trying to load a firmware 500 version 200.7.10.102.64 but the upgrate interface does not work. How could I load the ap via tftp?

Question

 • Access Points

23

2

Accepted Solution

CLI command to verify if I'm booted into the primary flash or secondary flash - Ruckus ICX 7450 ?

Hi all, I'm new to ruckus devices and trying to get my head around the CLI commands, etc. Is there a CLI command to verify which partition I'm booted into?

Question

 • Switches

26

2

How to unlink 2 R310 HELP please

Hi all and happy new year. Best on this 2022. I have 2 R310 connected on my same network (one as master, the other as slave). Is there anyway I can disassociate or un-link my slave from the master? I want them to work individually. I want to be able to manage them apart from each other. Any h

Question

 • RUCKUS at Home

13

1

0

Ruckus networking - Controller / Access Points

I'm new to the Ruckus world, we have a client that would like us to purchase Ruckus Access Points for his house. I've browsed Commscope's website to get a general idea what Access Points are offered for Indoor/Outdoor coverage and I've reached out to them so hopefully they get back to me sooner.

Question

 • IoT - Internet of Things

50

2

0

Where do you reboot your SmartZone 100 sz100?

I have been all over the interface and still cannot locate a place where you can click on a button that will reboot the smartzone 100.SZ100 firmware is: 3.5.0.0.832Thought it used to be under the user icon at the top right of the screen, but it's not there anymore.I can always yank the power cord ou

Question

 • 

Answered

 • Community & Online Support Services

1.8K

5