Official

Accepted

Unanswered

Advanced Filters

Search Results (1.7K)

Activity

Accepted Solution

Ruckus AP 320 not discover on ZD1200

Hi, I have an AP R320 with firmware version R320_114.0.0.0.1360, I want to link it to a ZD1200 controller version 10.1.1.0 build 55 but it does not detect it to approve it.In this controller I have 7 AP R610 and 2 AP R600 working.In the AP R320 I have defined the IP address of the ZD1200 controller

Question

 • ZoneDirector

159

5

0

Problems renewing certificate

We have 2 zonedirectors ZD302, one is being used as standy backup. We renewed our certificate and at first everything seemed fine. But when people login to our guest wifi and when they are being redirected to the portal website, they get the message that the website is not safe and the certificate i

Question

 • ZoneDirector

52

1

0

Replacing a router causes ZD1200 not to accept DHCP packets anymore?

so I have a simple site with 30 APs, cisco switch, a router, and a ZD1200. the router is pfsense - a software running on pretty much generic HW. I wanted to replace the router device (really simple procedure, just download config from old hw and upload if back to the new one), but after the swap, t

Question

 • ZoneDirector

43

3

0

ZD1200 and T310D not interlocked

Hi, This occurred during the process of connecting T310D to ZD1200. After the AP is linked to the controller, it receives a firmware upgrade and reboots, and the AP state on the controller is disconnect. And the same symptoms repeat over and over again and again. What should I check? ZD1200 ver

Question

 • ZoneDirector

31

1

0

Why you cannot block or ban a guest computer

if you have a web portal with allocated password... When the "guest" joins the wifi point under the zonedirector (10.4.1.0 build 226) they CANNOT ever be banned or blocked!!! clicking on "delete" or "block" in the zone director does nothing & they remain connected  and with access for t

Question

 • ZoneDirector

60

2

0

ZD1200 10.1.2.0 build 318

I have a ZD1200 handling 6 AP's currently running this code. I'd like to get it upgraded to some newer code.  I've been through release notes for all the 10.2 and 10.3 code and can't seem to find a supported upgrade path to get me on either 10.3 or 10.4, unless I've totally missed it.  Ca

Question

 • ZoneDirector

80

3

0

Is there ansible support for ZoneDirector 3000?

Hi! Is there ansible support for ZoneDirector 3000? I could use ansible with the icx module for Brocade Devices (7150 and 7250) but when I tried the same icx module for a ZD3000 I get an error. Is the ICX module supposed to support ZD3000? If not, which module would be used for ZD3000? Or is there

Question

 • ZoneDirector

48

1

0

Device Access Policy Allow IOS 14 or above on ZD1200

I configured Device Access Policy: to allow the connection of mobile devices using the iOS operating system.For devices using iOS 14 or above, the controller does not allow connection. Forum have information check which firmware can support ios 14 or higher connectivityI use zondirector ZD1200, firm

Question

 • ZoneDirector

59

0

0

ZoneDirector 1200 Firmware Upgrade

Hi all, I have a big project coming up next week to upgrade firmware of 2 x ZD1200 in Smart Redundancy mode, our current firmware is 9.10.2.0 build 29. Please could someone advise the upgrade path to the latest version, as I'm struggling to find our current build in newer versions. We are going t

Question

 • ZoneDirector

346

5

Accepted Solution

ZD1200

Hi community> we have 20 AP on network and 1 Zd1200 firmware 10.1.1.0 build 79. before accident everything was working fine.so after Zd1200 give us are problem we had to send to warranty then we update 10 AP to unleashed firmware 200.8.10.3.243 and 1 as Master .so now after receive my ZD1200 from

Question

 • ZoneDirector

270

4

0

Non network guys needs help with Zd1200 and R600/700/T300

I moved into a house with a ZD1200 and four APS (R600/700 & T300). We had some WiFi troubles so I ended up updating firmware on the ZoneDirector to 10.4.1.0 build 226. Since then no WiFi. I can access ZD and it shows only two APs, both of which are stuck at "Disconnected" or "Updating Firmware". Upd

Question

 • ZoneDirector

33

6

Accepted Solution

ZD 1200 Google Maps array.from error

Just got a new ZD 1200 on firmware 10.1.1.0 build 79 Getting this error after adding google maps api key: "This site overrides Array.from() with an implementation that doesn't support iterables, which could cause Google Maps JavaScript API v3 to not work correctly." Any ideas?

Question

 • ZoneDirector

176

1

0

Whitelisting "rouge" SSIDs in ZoneDirector 9.8.3?

Is it at all possible? It is supported on our newer controller running 10.2.1, but I cannot find a similar option for our legacy controller. Is there a way to do this? Perhaps via cli? Thanks in advance!

Question

 • ZoneDirector

17

1

0

Wireless network playing up after power cut

Hi there, about 6 months ago I upgraded my home (used as home-office) wifi network replaced my previous APs with a ZD1200 with 5 wired R720 AP's. This revolutionised my family/business wifi experience, which had been unreliable for the previous 10 years trying all combinations of wired APs, possib

Question

 • ZoneDirector

50

1

0

ZD1200 Solid Green lights but dead - 3 different instances this week

So I am a tech for a system integration company that primarily uses Ruckus in all of our installs.  I have had 3 calls this week about wifi down and each of them was the same result.  ZD1200 appears to have completely died.  All lights are solid green, even on a fresh reboot (never see the red statu

Question

 • ZoneDirector

976

13

Is there some kind of lab for testing ruckus devices and OS?

Hi, Some context: I have a project in which we intend to backup configurations using oxidized with git. The network is heterogeneous and contains other devices like juniper and cisco and those are already supported by oxidized. Ruckus devices are not supported though and I need to learn its cli, cr

Question

 • ZoneDirector

79

2

0

Check out Ruckus ZoneDirector 1200 Licenses, problems with primary machine, upload licenses to secondary.

Hello, I have 2 Ruckus ZoneDirector 1200, one is the main one and the other is the secondary one, the main one grants 26 licenses to the other ruckus r600 APs and the secondary one grants only 5 licenses, the main one has failed / failed and only the secondary one is working , which only grants 5 l

Question

 • ZoneDirector

55

1

0

R500 with ZD1200 10.4.1. Low UL/DL. Intermittent issue(

ZD1205 on 10.4.1.0 build 226 R500 APs mixed WPA2/WPA3 wireless lan My test devices: - iPhone 11 Pro 14.2 - iPhone 12 Pro Max 14.3 Beta 2 - MBP 16" with both 10.15.7 an 11.1 Beta - MacBook 12" running Mojave - Old Huawei Android 6.0 phone capable of 5 GHz Running dedicated iPerf server. Tested ~1 G

Question

 • ZoneDirector

41

1

0

Blocking iMessage with application denial policies

I am attempting to prevent users of our WiFi from sending and receiving messages via Apple's iMessage service on their WiFi only mobile devices. I have enabled application awareness on our Zonedirector and created a policy to block iMessage. THis policy is then applied to the relevant SSID. However

Question

 • ZoneDirector

48

1

0

Clients not roaming correctly and disconnect

I have a zd1200 with R610 access points. We're running 10.2.1.0 build 183.   We seem to have an issue in one spot of our warehouse where the as the clients move around will experience degraded wireless signal and eventually disconnect.   There are plenty of AP's in the area but

Question

 • ZoneDirector

213

1

0