Official

Accepted

Unanswered

Advanced Filters

Search Results (2.2K)

Activity

Accepted Solution

Official Solution

License threshold exceeded

I would like to add new AP on my VSZ but I'm experiencing the following problem : In "Alarms", I have this message "[AP Capacity License] limit reached at [90%]", while I currently only have 28 AP. Do you have any idea about this problem ?

Question

 • Access Points

44

1

0

Ruckus R500 Downgrade 104.0.0.0 -> 9.8.2.0

Hello, I've been given a site that's just had 2 new R500's installed with firmware 104.0.0.0.1347, they are using a ZoneDirector 1112 on 9.8.2.0. The ZD has tried to downgrade them when auto previsioning them with no luck, so I have stopped the auto prevision and removed them from the ZD and tried

Question

 • Access Points

75

5

0

Recommendation needed - AP outdoor

Hello everyone,I already have several ruckus APs, I'd like to add several others and a central controller (to manage the wlan, filter users, etc) which are compatibles with the existing access points (Ruckus ZoneFlex R600), is it possible? Currently the existing access points are installed some indo

Question

 • Access Points

17

1

0

Syslog Errors

We have started to receive quite a bit of error from the APs in our building. Below is a snippet of them. Version: 10.1.2.0 build 120 2021/03/10 10:20:54.000 chmod /dev/ttyp1 0666 failed: Read-only file system Error 2021/03/10 10:20:54.000 chown /dev/tty

Question

 • Access Points

40

1

0

Radius Ruckus Cloud NPS 2008 Setup

Has any been able to setup RADIUS through Ruckus Cloud to Windows 2008 Network Policy Server? I can't get it work with Active Directory usernames and passwords.  I'd like to setup an SSID where users authenicate to the SSID using their AD uname and password.  I'm new to Ruckus and am won

Question

 • Access Points

16

1

0

Accepted Solution

Ruckus R610 not getting enough power warning?

Not enough power provided - it's capabilities are downgraded. We have an unleashed network with all R510's except for one R610.    They are all plugged into POE only.   We have switched out the cables with brand new 6a cables and it still says not getting enough power.  &n

Question

 • Access Points

118

2

0

Heartbeat loss + random AP reboot

Hi! i use only 2 AP in my home in Unleashed mode with last firmware - R710 and H510. Both wired to Netgear OClick power switch. r710 pared with short 1m cable. h510 cable is in wall ~5-10 meters. Once a week i have random reboot. My question is - how i can determinate what is the problem?  las

Question

 • Access Points

116

1

0

Adding zf7962 to existing network

Hi - I have a Zoneflex ZD3050 that i need to add an additional ZF7962 to the network, and i was wondering a couple things. 1. Is there any way to preconfigure it with an IP address/network info without the controller before I go to the location of where it needs to be installed? If possible, I'd l

Question

 • Access Points

31

1

0

Ruckus AP R510 AP is not add

Ruckus AP R510 AP is not add in RUCKUS ZD1200 controller

Question

 • Access Points

34

1

0

7363 default username/password not working

i have just acquired 4 7363s (943-7363-UK01) off ebay from two different sellers. These seem to never been used before, but i have performed a hard reset anyway. When plugged into the same VLAN as our ZoneDirector, none of these APs will get discovered. When reset, they wont default to 192.168.0.1

Question

 • 

Answered

 • Access Points

927

15

R320 not functioning properly

I just purchased a new construction home and the builder has installed a Ruckus system that includes two Ruckus r320 wireless access points. The master WAP works wonderfully, but the other one has not worked for some time. What happens is (1) the power LED will go to a solid green, then (2) the CTL

Question

 • Access Points

68

1

0

Adding AP to VSz

I have an R510 with firmware 114.0.0.0.1360 connected to our VSz controller (VMWare) The VSz and all the other APs are version 5.1.2.0.373. The new AP says 'Online' and has and IP address in the range of the others but has no traffic and channels are 'N/A' I am guessing i need to change the firmwar

Question

 • Access Points

194

1

0

Accepted Solution

lldp-med at P300

I need to transport some few vlans and also lldp-med functionality to the other side of a P300-P300 link. Does that work ? Could not find any guidance for the setup.

Question

 • Access Points

34

2

0

LAG Configuration for P300 bridges

Looking to set up a configuration with two P300 root bridges connected to an icx7150 and two P300 non root bridges connected to an icx 7250 and utilizing link aggregation to provide more bandwidth. I found this reference on the ruckus site https://unleashedsupport.ruckuswireless.com/answers/00000643

Question

 • Access Points

33

2

0

How to enable wifi config menu of R720?

I want to setup my R720 to standalone AP but the config menu is disbaled, but this AP was previously used with zone director. Hope you can help me with this. Please see the attached screenshot below.

Question

 • Access Points

52

3

0

Ruckus T310c Initial Configuration - Reset Factory Settings - Troubleshooting

Hello, I am having trouble to setup an access point that I have here. The AP is the Ruckus T310c. I have made an reset to factory setting by clicking for more than 4 seconds in the button right next the ethernet port. I had configured the PC ip address to 192.168.0.5 and the gateway is 192.168.0.

Question

 • Access Points

474

1

0

R510 firmware upgrade

I'm in a networked Lennar home (came totally networked and was setup by others with little info given to us) that includes a R510 located on the living room ceiling. I am still running version 200.6.10.1.312 firmware and see that I can upgrade to 200.7.10.202.121 per the Unleashed app.  Someon

Question

 • Access Points

144

1

0

AP WLAN oversubscribed

Hello, we have an R710 in a Smartzone cluster running firmware versions: Controller: 5.2.1.0.515 AP: 5.2.1.0.698 We are seeing this outstanding WLAN alert: 'AP WLAN oversubscribed' ' does not have enough capacity to deploy all WLANs...; However the AP is only broadcasting 6 SSIDs and I unders

Question

 • Access Points

58

2

0

Ruckus AP's dropping connection

I have 2 Ruckus Indoor AP's. When devices are connected to either, the connection to the modem drops.  I unplugged just one to see if it was an isolated, issue w/ the unit downstairs, but that didn’t change the connection issue.  They are both plugged into a Ruckus ICX 7150.  A

Question

 • Access Points

93

2

Does the R320 AP work on Smartzone 3.6.2.0.78?

Just want to find out if Ruckus R320 will work on Smartzone 3.6.2.0.78. After I made sure the R320 is on an solo firmware and it will show up on the staging zone of the smartzone 3.6.2.0.78 but when I tried to move this AP to a working zone, this zone does not support this R320.

Question

 • Access Points

63

2

0