Official

Accepted

Unanswered

Advanced Filters

Search Results (533)

Activity
illegal class reported by PD

I have a Ruckus ICX 7450-48P that is having issues with a few new wireless access points. Under inline power I am getting a fault error "illegal class reported by PD" for 4 of these ports with these access points.  There are 2 other of these same exact APs plugged into 2 different ports that w

Question

 • Switches

67

1

0

Accepted Solution

VLANs and the ICX7150-C08P

Hi All! I received my ICX7150-C08P along with an R610 to replace my Ubiquiti gear. My current network configuration is Verizon ONT to pfSense on a Dell r210 -> Ubiquiti 8 port PoE switch -> Ubiquiti AC-Pro AP. I have 3 wireless LANs, one guest, one normal use, and one for the work laptops. Th

Question

 • Switches

257

2

Accepted Solution

Mac loop taking down uplink ports

I have a hub and spoke network with 7750 at the center and about 20 or so 7250/7150 switches(some in 2-3 switch stacks). There is a network outside of my control but utilizing my 7250/7150 switches for interconnect. i have 802.1w enabled for this vlan as well as loop-detection(under the vlan). What

Question

 • Switches

171

4

0

BUM Storm control

Hello all, Is it possible to configure BUM storm control in an ICX7150 with action to shutdown the interface? Thanks! Regards

Question

 • Switches

243

1

0

ICX 7150 stacking

Can you stack an ICX-7150-24 with an ICX-7150-24P? I have done a stacking with exactly the same model but never mix them in the past. We have a need to power some equipments with PoE and want to add either a 24P or 48P ICX-7150

Question

 • Switches

59

1

0

VOIP DHCP Option 43 Not Working | 8090DUFI Code L3

Hi, I've got a VOIP phone, and option 43 converted over to hex. I have verified that everything outside of the ICX is correct, because I can push the options to the phones from another vendor switch using the same hex string and a dhcp server locally on this vendors switch, as well as from another

Question

 • Switches

31

2

0

Accepted Solution

ICX 7150 ACL - Home user

Hello, I'ḿ new in Ruckus enviroment and I would like to replace UNIFI devices from my home. My first steps, replace the Unifi Switch for 3 ICX 7150 (12p), but I found it a little difficult to configure the 1st SW (layer 3). The other 2 SW (layer 2) are ok. I created the ACL but I don't know if is c

Question

 • Switches

312

1

Accepted Solution

ICX 7150 12p misconfiguration

Hello. I have 3 7150 12p and all have the same problem: if connected to another Ruckus switch with 1G SFP link is down. But if I connect with another brand everything is OK. Firmware = 08.0.95a ICX7150 to ICX7150 = NO OK ICX7150 to UNIFI US-8-150 = OK ICX7150 to TP LINK SG2210p = OK EDGEROUTER TO I

Question

 • Switches

79

2

Official Solution

Closed

issue with ICX 7150-08P

Hello, have an issue with ICX 7150-08P (Version:08.0.91T211), they can register to SZ100 but they are not showing any info and they are online like 4days ago.... but for 24 and 48 are working normally. please do you have any idea on this?

Question

 • Switches

50

2

0

Accepted Solution

Official Solution

ICX 7150-24P corrupted flash?

Switch lost it's configuration after a power outage.During boot i am getting the following messages:Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS error (ubi1:0 pid 566): ubifs_recover_leb: corrupt empty space LEB 11:249856, corruption starts at 767809UBIFS error

Question

 • Switches

210

4

Accepted Solution

Official Solution

adding a sec IP add on ve interface

how can i add a sec ip add on ve interfaces but on diff subnet with primary?

Question

 • Switches

175

2

0

Official Solution

ICX 6010 switch/router

Is there documentation for version 7 of the software?Is an advanced license for this model still available and how much is it?

Question

 • Switches

28

2

Official Solution

Lots of log errors, APs drop connection constantly, ICX 7150-C12P & R510

This log is repeated whenever a device drops a connection (whether it was unable to resolve ip, failed latency test, or failed upload)Oct 19 22:13:26 RuckusAP syslog: sqlited, sta_count = 1, inserted_sta = 1 Oct 19 22:13:19 RuckusAP ZD-APMgr: IPC_thread rcv ping from TACMON Oct 19 22:12:55 RuckusAP

Question

 • Switches

160

1

Official Solution

Remotely Convert from layer 2 image ("SPS") to layer 3 image ("SPR")

I have an ICX 7150-24P-4X1G switch that is running the layer 2 image ("SPS") that is remote. I do not have access to the console, or other out of band management options. I'd like to convert that switch to the layer 3 image ("SPR"). Is there a way to do this conversion remotely?My concern is how the

Question

 • Switches

150

1

0

Accepted Solution

Official Solution

hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

Question

 • Switches

73

4

Official Solution

ICX 7150-48ZP & LRM

I have a number of the 7150-48ZP that we just deployed.  In the past (with another vendor switch) we used LRM SFP+ for connecting wiring closets.  We put in the 7150's a Ruckus LRM and we are getting a Not Supported when plugged into the SFP ports in the front.  When we plug in an SR we don't get "N

Question

 • Switches

75

1

SZ100 with ICX7750-48XGC ,,,how to connect physically

i am implementing a NEW SZ100 with an existing network setup ,, the Core Switch is ICX7750-48XGC with 7 stacks..am new with Ruckus WLC as well as Ruckus Switches... please help me to understand its physical connectivity and Data plane communication.am Connected first 2 ports of WLC to Core Switch ,,

Question

 • Switches

23

1

Official Solution

sha256 encrypted username password

What is the username password encryption strength number to indicate encrypted password is sha256?  For example, md5 encryption strength number is 8 (username joe password 8 ).

Question

 • Switches

212

5

Accepted Solution

Official Solution

ICX 7450-48 appl process cpu usage

Hi guys,Hope you're well.We've noticed a very strange behaviour in our ICX7450. We got a very high CPU usage but didn't ffind anything that justify it. This only occurs with CPU0. CPU1 is working fine as you can see below.SSH@SPCRDC2ITA001#sh cpu-utilization cpu0:7 percent busy, from 4 sec ago1   se

Question

 • Switches

235

3

I have a ICX 7150 that is considered a "brick". I can not get the TFTP or ping to work

I have a ICX 7150 that is considered a "brick". I can not get the TFTP to work...Can not even get the ping command to work.  Does anyone know of any command that will bring the basic network function back in order to TFTP?ICX7150-Boot>printenv baudrate=9600 ipaddr=192.168.1.30 serverip=192.168.1.

Question

 • Switches

298

4