Official

Accepted

Unanswered

Advanced Filters

Search Results (559)

Activity
Routing Public LAN (/28 block) over Peer to Peer (/29 Block) Gateway Connection

Comcast ran an EDI circuit (Metro Fiber) to our office. They originally gave us. /29 block but we needed additional public addresses. I am able to assign any of the useable addresses from the /29 block and use the gateway that is in the same subnet without any issues. What is new for me and where I

Question

 • Switches

26

0

0

Accepted Solution

Non-blocking throughput?

What is the Non-blocking throughput of the ICX7150-24P (or any ICX switch)? Can't find this anywhere. The data sheet mentions Non-blocking throughput, but that's it. I assume that means that the switches have a Non-blocking design, but hoping to confirm that.  Thank you.

Question

 • Switches

107

1

0

ICX7250 , port security: mac address is refreshed on interface and not moved...

Hi, since last december I have this security warning on our ICX 7250 switches where port security is enabled, its happening randomly on some ports.It's not a "violation", but a "refreshed" ?!?Example of today:W:Security: Port Security secure MAC address xxxx.xxxx.9c91 is refreshed on interface ether

Question

 • Switches

86

1

ICX 7150 Switch Layer 2

Hi, I have a new Layer 2 ICX 7150 switch and I want to connect it to 6 access points Ruckus R550. what I want to ask is how to configure the syntax to connect the switch to the access point, because here I am familiar with Cisco's device settings. Here is the configuration I want to plan to do: #c

Question

 • Switches

102

1

0

Problem routing public lan out over peer to peer up block with gateway

Issue routing public lan up block to peer to peer block with gateway

Question

 • Switches

26

3

0

Accepted Solution

stacking over copper ICX 7250

hello All, can we do a stacking if we connect copper transceiver to uplink port on ICX7250-48P-2X10G ??  

Question

 • Switches

118

2

0

stackwise virtual

Good afternoon Ruckus forum Nice to greet you, I have a specific question about the technology that Cisco handles called virtual stackwise, in RUCKUS we have something similar? Also consider which switch models we can perform virtual stacking on. I appreciate the support

Question

 • Switches

64

1

0

Does ICX 7250s support SFP+ from other vendor such Aruba

Does ICX 7250s support  SFP+ from other vendor such Aruba 

Question

 • Switches

136

2

0

illegal class reported by PD

I have a Ruckus ICX 7450-48P that is having issues with a few new wireless access points. Under inline power I am getting a fault error "illegal class reported by PD" for 4 of these ports with these access points.  There are 2 other of these same exact APs plugged into 2 different ports that w

Question

 • Switches

73

1

Accepted Solution

VLANs and the ICX7150-C08P

Hi All! I received my ICX7150-C08P along with an R610 to replace my Ubiquiti gear. My current network configuration is Verizon ONT to pfSense on a Dell r210 -> Ubiquiti 8 port PoE switch -> Ubiquiti AC-Pro AP. I have 3 wireless LANs, one guest, one normal use, and one for the work laptops. Th

Question

 • Switches

289

2

Accepted Solution

Mac loop taking down uplink ports

I have a hub and spoke network with 7750 at the center and about 20 or so 7250/7150 switches(some in 2-3 switch stacks). There is a network outside of my control but utilizing my 7250/7150 switches for interconnect. i have 802.1w enabled for this vlan as well as loop-detection(under the vlan). What

Question

 • Switches

185

4

0

BUM Storm control

Hello all, Is it possible to configure BUM storm control in an ICX7150 with action to shutdown the interface? Thanks! Regards

Question

 • Switches

262

1

0

ICX 7150 stacking

Can you stack an ICX-7150-24 with an ICX-7150-24P? I have done a stacking with exactly the same model but never mix them in the past. We have a need to power some equipments with PoE and want to add either a 24P or 48P ICX-7150

Question

 • Switches

63

1

0

VOIP DHCP Option 43 Not Working | 8090DUFI Code L3

Hi, I've got a VOIP phone, and option 43 converted over to hex. I have verified that everything outside of the ICX is correct, because I can push the options to the phones from another vendor switch using the same hex string and a dhcp server locally on this vendors switch, as well as from another

Question

 • Switches

35

2

0

Accepted Solution

ICX 7150 ACL - Home user

Hello, I'ḿ new in Ruckus enviroment and I would like to replace UNIFI devices from my home. My first steps, replace the Unifi Switch for 3 ICX 7150 (12p), but I found it a little difficult to configure the 1st SW (layer 3). The other 2 SW (layer 2) are ok. I created the ACL but I don't know if is c

Question

 • Switches

340

1

Accepted Solution

ICX 7150 12p misconfiguration

Hello. I have 3 7150 12p and all have the same problem: if connected to another Ruckus switch with 1G SFP link is down. But if I connect with another brand everything is OK. Firmware = 08.0.95a ICX7150 to ICX7150 = NO OK ICX7150 to UNIFI US-8-150 = OK ICX7150 to TP LINK SG2210p = OK EDGEROUTER TO I

Question

 • Switches

83

2

Official Solution

Closed

issue with ICX 7150-08P

Hello, have an issue with ICX 7150-08P (Version:08.0.91T211), they can register to SZ100 but they are not showing any info and they are online like 4days ago.... but for 24 and 48 are working normally. please do you have any idea on this?

Question

 • Switches

52

2

0

Accepted Solution

Official Solution

ICX 7150-24P corrupted flash?

Switch lost it's configuration after a power outage.During boot i am getting the following messages:Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS error (ubi1:0 pid 566): ubifs_recover_leb: corrupt empty space LEB 11:249856, corruption starts at 767809UBIFS error

Question

 • Switches

234

4

Accepted Solution

Official Solution

adding a sec IP add on ve interface

how can i add a sec ip add on ve interfaces but on diff subnet with primary?

Question

 • Switches

198

2

0

Official Solution

ICX 6010 switch/router

Is there documentation for version 7 of the software?Is an advanced license for this model still available and how much is it?

Question

 • Switches

29

2