Official

Accepted

Unanswered

Advanced Filters

Search Results (559)

Activity
Brocade to Dell switch lag issue

Having issues configuring a new Dynamic Lag between Brocade ICX 6610 to Dell s4112t-on, both switches on the latest firmware. Configuration looks good on both sides but no success.  I have tested the Dell switch to a cisco switch I had recently taken out of service and that lag works.  I

Question

 • Switches

138

2

0

Accepted Solution

Ruckus Connection with Fibre network

I have a Ziply-FIber ethernet cable coming into my home. Can I connect this directly to the ICX 7150 or do I need to get through a router?

Question

 • Switches

33

1

0

Accepted Solution

Upgrading Firmware ICX from SmarZone, is it wipe the ICX configuration?

Hi all, I want to upgrade the ICX firmware and there are many switch with across location (more than 100 units). Is the configuration will be wipe/removed when I upgrade the firmware from the SmartZone? (beside the Backup and Restore config) Thanks

Question

 • Switches

41

1

0

Does ICX Ruckus switches support finisar sfp ?

Does ICX Ruckus switches support finisar sfp ?

Question

 • Switches

32

1

0

Accepted Solution

Help with ICX 7150s and stp deployment

Hey guys. I'm about to replace our current network switches (HPs) with brocade icx 7150 and I need your help. Here is my scenario: ICX 6430-48 (stack): this is the core or distribution switch (this is going to stay in place until I replace the access switches) Port 2/1/33 is tagged in all vlans (2,

Question

 • Switches

158

4

0

How to use Server based DHCP with ICX switches

Hi, currently trying to get dhcp to work with a few new 7150's we dhcp running on one of our server connected to the primary switch. We have multiple subnets for various areas. but can figure out how to use the switch as a relay for dhcp.

Question

 • Switches

158

2

0

Accepted Solution

ICX 7150 VLAN 1

Hi, I'm new to icx's. I have a 7150-24P. I'm trying to configure ethernet 1/1/24 as the uplink port so I tagged in all vlans except vlan1 (default vlan, which I don't use). When I run sh runn this is showing on vlan 1, is this normal or is there something wrong? I don't want or need to use vlan 1 a

Question

 • Switches

64

1

0

VLAN 1 is not working on stack mode

Dear All, First off please excuses me English isn't my native language. We have two of Brocade ICX7250-48P stacked, the idea behind is to accomplish a failover , whenever switch one is down we will remain online because each server will have two ports connected to each switch. the issue is Switch nu

Question

 • Switches

62

4

0

ICX7250P POE Daughterboard Replacement?

HiI have obtained a ICX7250P with 08.0.95ba Firmware The switch works normally, but the POE Module Reports:- Severe Error - Module Failed to Init. I have reloaded the Boot, Image and POE Firmware with no effect. The switch works normally, the POE module fails to initialise. On closer internal ins

Question

 • Switches

26

1

0

SSH Stops after 2 weeks

We have multiple ICX 7750 and 7450 in our DCs. Randomly we get SSH failing after approx 2 to 4 weeks. To fix we have to go to DC and console onto device and apply crypto zeroise then crypto generate CLI commands. This is impacting and time consuming. Any ideas why it is doing this? Code version is 8

Question

 • Switches

473

6

How do I check for ECMP with ebgp?

Hi all, I've enabled ip load sharing globally as well as maximum-paths in ebgp itself.  Checking my route table, I see only one route to my destination.  If I disable the ports, the secondary route does insert itself in the table.  Is this expected behavior for ECMP over ebgp?&nb

Question

 • Switches

31

3

0

Switch not getting configuration from SmartZone

We are using a SmartZone 100 to manage our APs and are now installing ICX 7650 switches to run multi-gig APs. These are the first Ruckus switches we have and I am having issues with them getting the configuration from the SZ. SZ is on version 5.2.1.0.515 Switch version is TNS08095a I have setup swi

Question

 • Switches

215

1

0

Cloud Support for 7250/7450 Series

We have 16 7250/7450 switches in our network. None are stacked, all spread throughout campus. We also have 40 R710 APs on a ZD1200 controller. We are evaluating migrating this to Ruckus Cloud. For the APs, we will either keep the 710s or possibly migrate to WiFi6 APs (all or some). This part is c

Question

 • Switches

47

2

0

ICX Switches - Integrate with Ruckus Cloud platform?

Can the ICX switches fully integrate with Ruckus Cloud?I have been using the Ruckus cloud platform and wanted to know if the ICX switches could be managed via the cloud portal?I have found some info about ZD integration but don't seem to be able to find any info relating to the Cloud. ThanksPhil

Question

 • Switches

183

2

ICX Upgrade HTTP Request Failed

Hi, I'm trying to upgrade via https with command copy https flash The file is no issue when I'm opened with browser and download directly to computer, but at switch I got error message HTTP Request Failed for Request ID: 1. Response Code: 404 Right now I'm using firmware SPR08092d and want to u

Question

 • Switches

112

6

0

There is any password restriction for ssh in ICX7150/7250 switches?

We have a new standard from our Project Managers regarding users passwords in ICX7150/7250 Switches. They want us to use something like !P@ssw0rd! (with some characters between exclamation mark) but is not working for SSH. They works with the ! as enable password.I removed the first ! and it worked.

Question

 • Switches

46

1

Accepted Solution

Ruckus branded software on Brocade branded ICX 7xxx hardware?

It's such a long story about why, but I have a pair or Brocade ICX 7450-24 switches that were never deployed that I'm just rolling out now. I'd love to update the firmware first, but it appears Ruckus has taken over Brocade. Show version provides, among other things: SW: Version 08.0.20T213. So tha

Question

 • Switches

85

10

0

ICX6450-48 showing Error: I2C access failed for device 0x2f

Hello, This is a NOS switch that I just purchased. I updated the FW using the configuration file (in 08030h, so FI08030h_Manifest.txt) through the console. All went well and I reset the switch. Problems started when I moved the switch from the bench to the rack. The above message shows up in the co

Question

 • Switches

111

6

0

Official Solution

How do you disable fanless mode on a ICX 7150?

I am new to working with Ruckus switches. We purchased one and I am trying it out as well as it's features.  I enabled fanless mode and am wondering if there is a command to disable it without factory defaulting the switch.  Any advice is appreciated.

Question

 • Switches

125

2

0

ICX7150-C08P SFP Uplink problem

Hi guys! I have a partner configuring 7150-C08P (running 8.0.91t) connect to 7150-24P (.90d). It works if using RJ45 ports to connect. When using SFP 1G, the C08P end is up, -24P end is down (same result with all port). They use a 7150-12P to test with 7150-24P and everything is fine. Any suggestio

Question

 • Switches

321

2