Official

Accepted

Unanswered

Advanced Filters

Search Results (780)

Activity

Accepted Solution

Official Solution

Unstable connection with Unleashed 200.9.10.4.243

Hi, Following the FragAttacks announcement I have upgraded my R550 AP to 200.9.10.4.243 only to find subtle connection stability issues between the AP and a Linux ThinkPad T480s with a Intel 8265 wireless chipset. The symptom is that any tcp/udp/icmp package transmission just stops after 1-2 hour

Question

 • Unleashed

190

3

Poor connection on multiple clients

Hello! I'm pretty new to ruckus, and i'm having an issue with poor connection on several clients, I hope you can help me out! I have a home with 3 unleashed 550 AP's. 2 upstairs 1 downstairs. I am getting poor connection on devices even when just maybe 30 feet away with no obstructions between the

Question

 • Unleashed

109

3

0

Accepted Solution

Official Solution

Will Ruckus R600 US work in the UK?

Hi, I've seen some Ruckus R600's available for sale but they have the US in the description. As I'm  the UK will these work fine or are there some potential issues ? And finally if a R600 that was pulled from a previous installation was not reset or removed from the previous configuratio

Question

 • Unleashed

79

2

0

Q regarding IP ranges/routing and SSIDs

Dear all, I am a (prospective) Ruckus newbie interested in the following setup with a couple of R650’s: the R650's would be connected over 2.5Gb Ethernet to a Mikrotik router 10.1.0.1 offering dhcp within 10.1.0.0/16; 10.1.0.1 is a NAT-gateway towards the Internet. I would then like to span

Question

 • Unleashed

105

2

0

Configuring Unleashed’s auto reboot threshold?

I’ve noticed that in an unleashed network, if the master loses Ethernet connectivity it almost immediately reboots with “master became mesh” Unfortunately at one of my networks, we heavily use MoCA and a cable modem router which reboots every few days to apply software updates. That usually doesn

Question

 • Unleashed

104

1

0

Client sent me this request about TLS and I'm not sure how to respond.

"Can you see if our we can update the firmware in our Ruckus equipment? We have TLS1.0 and need 1.3.  They are popping up in vulnerability scans that the lower TLS level is a weak spot in the system and need updating." They have 2 R320 AP's (v. 200.9.10.4.212) and a 7150-C12 switch. I'm

Question

 • Unleashed

101

1

0

Forcing a client to connect to specific AP under Unleashed + Mesh

We've got R510 + R310 APs, all connected into one Unleashed (200.7) network, with Mesh enabled. Few clients seem to have issues connecting to nearest AP (R310), which causes slow network access and interruptions. When they re-connect to unwanted AP (R510), we can either reboot that AP (R510) or reb

Question

 • Unleashed

481

4

0

Accepted Solution

Official Solution

Is there a way for the guest network on the Ruckus Unleashed to not have the Captive Portal appear at all?

Hi, Networking newbie here and I apologize if I get some terms or concepts wrong about certain things. To give a little background, I work for a start up and our network infrastructure is quite simple. We do however have a main switch, firewall and APs, but their setup is very basic. What

Question

 • Unleashed

117

1

0

Unleashed R500 and T610 firmware best practise

We want to add a  T610 to existing R500 access points running unleashed. There are 5 x R500s currently on site, there are normally only 4 -6 users.I notice the Latest unleashed firmware for the R500s is 200.7.10.202.118.The new T610 can run 200.7.10.202.118  or upgrade to 200.8.10.3.278.Is the best

Question

 • 

Answered

 • Unleashed

84

1

Accepted Solution

Official Solution

How to make “no qos directed-multicast” persist across reboots?

I’m running an R650 (Unleashed 200.9.10.4.233) with a number of wireless Sonos speakers on my network. I’ve applied the fix through the CLI to allow the Sonos controller to see the speakers: enable config wlan MyWifiNetwork no qos directed-multicast end end Unleashed confirms the settin

Question

 • Unleashed

316

5

Sonos and Ruckus unleashed

There are many forum posts regarding issue's with Ruckus AP's and the use of Sonos wireless speakers. I have been using Ruckus AP's professionally as well as personally for many years now. Over the past few days I have been trying to figure out what is the best way to make the Sonos speakers work

Announcement

 • Unleashed

455

4

Ruckus - ring problem

Hi, I have had 2 Ring cameras connected for well over a year to our ruckus Wi-fi fronted by 4 unleashed R310s. No issues at all. Last week one of them lost its connection and wouldn’t reconnect. Helped by Ring support they asked me to reboot everything, zero the ring Camera settings and add i

Question

 • Unleashed

234

2

0

new to ruckus unleashed - need some newb help

I have 4 unleashed APs. 1 connected the first one R320 and ran through the setup wizard, set it as the master I am now trying to add a 2nd AP (R550), but when I power it on, it does not connect to the master. it appears just to do nothing. if i connect to the configure.me network it just says "bui

Question

 • Unleashed

107

3

0

Accepted Solution

RUCKUS Unleashed 200.9 (GA Refresh3) Release Notes Unavailable

Might someone please highlight, in their own words, the major changes from the release notes file at RUCKUS Unleashed 200.9 (GA Refresh3) Release Notes | Technical Documents | Ruckus Wireless Support? Ruckus appears to be putting more general content behind a paywall, as I had no issue reviewing th

Question

 • Unleashed

170

3

Official Solution

Unleashed 200.9.10.4.233 firmware

Hi all, I see that unleashed firmware 200.9.10.4.233 has been released if you look on the master AP via the browser. I don't yet see it on the site hence there are no release notes available yet. I succesfully upgraded my 3 ap's (2 x R710 and 1 x R610) to unleashed 200.9.10.4.233 however 2 AP's (ex

Question

 • Unleashed

1.5K

27

Connectivity issue with Laserjet MFP M283fdw

Hi All, same install I have been referring to lately with the r550 challenges. I have got it somewhat stable now and will try updated firmware as it becomes available (200.10 next). However, I have a new Laserjet connected to the r550 unleashed network. It works, but after a while the connection dro

Question

 • Unleashed

253

4

0

Admin login credentials

I connected to the Ruckus using the IP address and got to the login screen. I tried using the login/password super/sp-admin, admin/sp-admin and admin/password. But none of them worked. This is for the ruckus icx 7150-c12p from Lennar. I tried the Unleased app as well and any attempt to connect to

Question

 • Unleashed

290

1

0

R510 Unleashed & Panasonic Mobile Softphone App

We have an old install from 4+ years ago where the clients want to use a Panasonic Mobile Softphone app. I am not 100% sure how the network is configured (we only supplied the AP). The AP is a single Ruckus Wireless R510 Unleashed (200.9.10.4.233). The clients have informed me the Softphone app w

Question

 • Unleashed

32

1

0

ruckus r610 unable to recognize internet

Help. I an new to Ruckus, and I cannot get the configured r610 AP to connect to the internet. I cannot for the life of me get the AP to be recognized by my AT&T modem and I have run out of ideas. Internet down: Logging into the admin portal I can see the internet is disconnected. Also when look

Question

 • Unleashed

211

4

0

r510 access point => Get configuration fault error with Access points stuck in provisioning mode

I have a home network that is setup with unleashed and 2 r510 AP's Today I randomly lost internet and the logs show => Get configuration fault and the Access points are stuck in provisioning mode... I tried cycling power but it's like the configuration was removed??? I could use some insight ple

Question

 • Unleashed

79

1

0