Official

Accepted

Unanswered

Advanced Filters

Search Results (559)

Activity
how to set default secondary Flash image

Hi, we are using ICX7150 switch for router feature, therefor i had use the below command for using secondary image and reload the switch in the secondary image. but, while i reboot the switch, its up by primary image only. # boot system flash Secondary yesCan you please help me to tell us how to s

Question

 • Switches

802

2

0

ICX 7150 C12P Switch

Hi everyone, I got a house (Lennar) and it comes with ICX 7150 C12P and I tried adding the ethernet cables to the switch so I could connect tv's and computers in different rooms to ethernet. But I'm getting 10 Mbps. How do i change the port to have actual speed to 1G-Full instead of having 10-ful

Question

 • Switches

119

1

0

Accepted Solution

tagging a VLAN on lag port

Hi all, I have an ICX7150 with a lag port that uplinks to a 7650. I created a new VLAN that I need to tag, so I can have this traffic flow between the two switches. When I do this, do I need to tag the vlan on the lag port, or just on the ethernet ports that make up the lag port, or tag all of

Question

 • Switches

263

2

Uplink goes down when AP plugged into switch

New to Ruckus switches. Have an ICX 7650 with one uplink to an Extreme switch. ICX is managed by a SZ100.  When I plug in a Ruckus R650 to a port on the ICX switch, 1 gig or 2.5 gig port, the uplink port goes down.  Show Interface says port 1/2/1 is blocking but gives no indication of why

Question

 • Switches

466

4

0

L3 config

Hi guys, I have conf icx 48 on L3 firmware as it shows here: telnet@ICX7150-24P Router(config)#sh runCurrent configuration:!ver 08.0.90jT213!stack unit 1 module 1 icx7150-24p-poe-port-management-module  module 2 icx7150-2-copper-port-2g-module  module 3 icx7150-4-sfp-plus-port-40g-modu

Question

 • Switches

65

2

0

ICX 7250 Enclosure Screw Specifications

Hello Ruckus Community, I am looking for the enclosure screw specifications for the ICX 7250 so I can purchase additional screws. I couldn't find the information in the documentation. Does anyone know what the specifications are? In addition, is it a specialty screw that I need to purchase directly

Question

 • Switches

28

0

0

Inter-VLAN Routing to Untagged Interfaces

Hello All - Relatively new to VLANs and am building upon a setup from a previous employee. Initial question: How do I make a device which is untagged in a non-default VLAN be able communicate with the other VLANS? More Details: Our school district has a single core district router, with indivi

Question

 • Switches

132

2

0

Accepted Solution

ICX 7550 web-management support is not available for this device?

I've been trying to enable web management on an ICX7550-48ZP without any luck. At best, when web-management is enabled for HTTP I get a web page with just the message "Web-management support is not available for this device". If I enable web-management over HTTPS then I get a connection closed inst

Question

 • Switches

156

2

0

Icx7150-c12p will no power up

Switch will not power up. No LEDs no humming. Nothing. Is there any way to bring this back to life? Or is it just dead? Thx, Scott

Question

 • 

Answered

 • Switches

338

4

Enable Password Fiasco

Hi All, I'm working with a client who recently let go of their network engineer and hired our company to help with managing their network. It appears that the enable password they were given by the engineer as he left is not the actual enable password, which leaves us in a bit of a situation. 

Question

 • Switches

67

3

0

Accepted Solution

FCS error on Ruckus Switch

Hi. I have 7150 C12 connected (powering 11W) to the Unifi USW Flex and Unifi powering 3 security cameras. Every day, the Ruckus switch shows only 1 FCS error, sometimes 1 Giant error too. I swapped cables, connectors and tried different ports, but every day I get the same error. Does anyone have any

Question

 • Switches

162

2

Accepted Solution

How can I make it invisible SNMP: Auth. failure, intruder IP log message on ICX

*Here is an example of a logs contains SNMP authentication failure. Apr 20 14:47:03:I:SNMP: Auth. failure, intruder IP: 104.206.128.xxApr 20 14:10:13:I:SNMP: Auth. failure, intruder IP:  170.130.187.xxApr 20 14:03:04:I:SNMP: Auth. failure, intruder IP:  104.140.188.xxApr 20 13:57:19:I:SNM

Question

 • Switches

344

2

Send radius accounting interim-updates when User-Name Changes

Hello, I am trying to configure ICX7450 with FortiGate Firewall Radius SSO. It is working ok for most of the cases. The only problem I have is on Windows 10 domain computer using User or computer authentication dot1x. The behaviour is as fallows: 1. The computer authenticates with the Computer Domai

Question

 • Switches

115

5

ICX7150-C12-Switch admin username and password

Hi, I am 100% new to this and don't know much so bare with me. On the unleashed dashboard it shows I can add my switch to it. ive also noticed I needed to upgrade my firmware to 08.0.90 or later. "was running 08.0.80(something). I upgraded the boot and firmware to 08.0.90d, (UFI). I have check and

Question

 • Switches

2.7K

2

0

Accepted Solution

Official Solution

ICX 7150 stack unconfigure unit # not working ? 08.0.90jT211

Hello, We are installing a group of stack 7150 switches. When In place we saw that a few stacks are having more or less Switches as required. so the problem is when trying to remove the units that will not be necessary the master switch of the stack is not accepting the unit number and saying that i

Question

 • Switches

246

1

0

Accepted Solution

ICX 7850 Switch EOL

Greeting first of all, i hope to you company develops. I can't find ICX 7850 Switch End of Service(or End of Life) date. so where can i find ICX 7850 Switch End of Service(or End of Life) date? or could you know to me ICX 7850 Switch End of Service(or End of Life) date. Thank you 

Question

 • Switches

54

3

0

Accepted Solution

Configure RADIUS authentication with WiFi and ICX 7150

Hi, Does anyone have a good reference on configuring 802.1x for both WiFi and port security (on ICX 7150)? Using Ruckus Cloud, it looks pretty simple to add the RADIUS server and get authentication going for a SSID, but I am pretty sure there is more to it than just that :). And reading through the

Question

 • Switches

291

3

0

Accepted Solution

Stacking an ICX 7150-24p with an ICX 7150-C12p

Hello, can someone please tell me if i can stack an ICX 7150-24p with an ICX 7150-C12p and maybe why? Thank You

Question

 • Switches

58

1

VPN duplicate ISAKMP message received ICX-7450

Hub and Spoke topology with multiple IPSEC tunnels going from the Hub to remote spokes for centralized licensing of software. 3 active tunnels, all with identical configurations, minus unique source/destination/authentication combos. 4th area, has the same configurations as the 3 active, again with

Question

 • Switches

27

2

0

Accepted Solution

Official Solution

Basic questions about the ICX 7450 - 8.0.80j

I'm brand new to the Ruckus 7450 switches (and to using ruckus in general) I've been able to update the software to the latest recommended GA version, but I'm coming from Cisco so I have some questions and I didn't see it in the documentation (I probably missed it) In the cisco world I would open an

Question

 • Switches

171

1

0