Official

Accepted

Unanswered

Advanced Filters

Search Results (559)

Activity
Could not assign ip address

I am configurating IXC7150-C12-2X1G. I could not assign IP address for switchSomeone can help me please.UNIT 1: compiled on Aug 28 2019 at 13:38:53 labeled as SPR08090c      (32536860 bytes) from Primary SPR08090c.bin (UFI)        SW: Version 08.0.90cT213       Compressed Primary Boot Code size = 78

Question

 • 

Answered

 • Switches

504

3

Managed ICX 7150 Stack Switches after a reboot change UFI to non-UFI ?

Hello pack ! I am having trouble in 2 stack of switches that after a reboot by unknown reason somehow "managed" to change their ufi to non-ufi firmware even if they keeped the same version. So the situation is that group of switches of a specific building, which were already managed by the smartz

Question

 • Switches

169

1

0

Accepted Solution

ICX 7150 -TFTP issues

hello experts, I have two ICX switches 7150 . * I was trying to copy the configuration from the switch to TFTP or vise versa * The TFTP and the switch are on the same subnet , ping successful from the laptop to switch , Ping failed from switch to laptop  _ I left the switch port that con

Question

 • Switches

105

3

Accepted Solution

CX 7250-48P switch POE problem

Dear All, Hope all find in good health. One of my ICX 7250-48P switch is equipped with VOIP phone , POE is working great and stability . Last 2 week ago Switch POE function is suddenly stop but all config and switch function is working as usual. i try to reload switch and inline power disabl

Question

 • Switches

106

3

0

Accepted Solution

How to Install ICX Switch in Emulator Software

Hi All, i would like to create testing environment for ICX SW and Zone Controller but I don't know to Install that particular device in Emulator Software (GNS3) . If you have any idea please share for my testing . Thanks You.

Question

 • Switches

268

4

0

ICX7150-48zp : LLDP MED Voice policy UNKNOWN for MiVoice Connect phones on 2.5G ports

I have a support ticket open with our vendor, but I'm hoping others have seen and resolved my issue.I'm deploying Mitel 69XX series phones to several new stacks of icx7150 switches (a mix of 48zp and 48pf).  I'm using LLDP MED network policies to set the voice vlan and qos setting.  This is working

Question

 • Switches

229

3

Accepted Solution

Configure 802.1x auth on 7150 stacks

I need to get 802.1x auth configured on all of our ICX 7150 switches, and am reading through the documentation trying to learn. I came across this in the Security Guide/Flexible Authentication section: "Before authentication is enabled on a port, the port can belong to any VLAN, including the sys

Question

 • Switches

58

2

0

ICX 7250 ARP and IP Source Binding Problem

Hello, I have following problem when enter this: CUS(config)#arp 95.183.181.254 00e0.4c68.0b7d ethernet 5/1/13ADD static arp 95.183.181.254 -> 00e0.4c68.0b7d -> 1/2/5 (VRF: 0)Error - ip address not directly connected I want to bind my pc ip address with that mac address on 13th port.

Question

 • Switches

79

1

0

Accepted Solution

ICX-7750 SSH sessions terminate unexpectedly several times in a row

This is an intermittent issue. Our 7750 switch will unexpectedly terminate a authenticated SSH session, sometimes several times in a row. Debugging SSH sessions show the log: Security: SSH logout by un-authenticated SSH user from src IP x.x.x.x from src MAC xxxx.xxxx.xxxx from PRIVILEGED EXEC mod

Question

 • Switches

57

4

0

Official Solution

ICX7250 Stack Offset Problem

Hello, During interactive stacking, I get this error: You selected 8 unit(s): #1: ID=2, #2: ID=3, #3: ID=4, #4: ID=5, #5: ID=6, #6: ID=7, #7: ID=8, #8: ID=9,T=2h5m50.7: Error! stack interactive-setup option 2: link 9/2/1 to 1/2/4 has different offset. On ports 9/2/1, 9/2/2 and 1/2/3, 1/2/4 th

Question

 • Switches

44

2

0

Official Solution

Loop Detection Problem in Stack

Hello, I have 2 stakcs. One of them has 9 switches and another one has 11 switches. I activate loop detection for all vlans. When I connect my uplink to stack masters, there is no problem. Loop detection works. But when I connect uplink to another stack members and I make a loop, loop dete

Question

 • Switches

207

4

0

Accepted Solution

how i configure multiple vlans in a port in a Ruckus 7150-c12p switch

Hi, i have the need, to make a 3 vlans configuration in a single port because we have a H510 Ruckus AP, and we need to have 2 SSID in a diferent vlans and we dont know how i can configure the port. thanks

Question

 • Switches

161

1

0

Accepted Solution

ICX7150 vlan setup

My current setup: [AttGateway] --> [Asus Router] --> [UDM-Pro (VLANS)] --> [Unifi AP (VLANS)] My desired setup: [AttGateway] --> [Asus Router] -LAG-> [ICX7150 (VLANS)] --> [Unifi AP (VLANS)] --> [UDM-Pro (Home lab VLANS)] I am working on setting up a home lab and would l

Question

 • Switches

176

3

0

Accepted Solution

The switch is rebooted Brocade ICX 7250-24P

Good day! I'm new to this, but I got this toy from a former employee))) I tuned it up, but the next day it just simply rebooted to the factory settings and that's it! I can only enter it through boot, and if I reboot, then on the command line it simply does not respond! If someone came across this,

Question

 • Switches

75

3

0

Accepted Solution

Port MAC Security Question

I am reading about "port MAC security" in the Fastiron Security Guide. We may choose to use this instead of full blown 802.1x auth on all ICX end-user access ports. It is not clear to me though - MACSec appears to be a separate licensed feature, And is only supported on 7450 and better devices. Doe

Question

 • Switches

56

3

0

Routing and ACL. To direct traffic to firewall

Hi, I have a very unique setup witch I would like to implement in the company. We have a Stack of 7850 as Core Router. We got up to 100 VLANs implemented.I plan to route some of the VLANs in the Switch Stack eg. VLAN1 to VLAN2 is routed over the switch. Same with VLAN 3 to VLAN4.To the firewall

Question

 • Switches

47

1

0

Accepted Solution

Official Solution

ICX 7850 egress ACL not supported with untagged vlans?

Can anyone explain why this is the case? From the 08.0.92e documentation:  On ICX 7850 devices only, configuration of egress ACLs is blocked on any virtual interface with an associated VLAN that contains an untagged port. And sure enough, when I try: (config-vif-1234)# ip access-gro

Question

 • Switches

45

1

0

ICX Vsz upgrade failed

Hi guys does anyone know why I have this error while trying to upgrade icx switch trough vsz? Connection no response, please try again later. (last command: copy flash flash secondary)

Question

 • Switches

48

7

0

ICX 7150-C12P temperature sensor questions

So I'm a Lennar home user here and stumbled across 2 temperature questions I was curious about. 1 - Does anyone know what the different temp sensor locations are in the switch? Best I could find was an old Terry Henry vid about the 7250-24P and sensor 1 was 'management thermal plane' and 2 was P

Question

 • Switches

100

0

0

Accepted Solution

L3 Premium License Problem

Hello, I installed l3-prem-2X10G license but my ICX 7250 does not have L3 features. What could be the problem? I reloaded the switch but it is has l2 features, not L3. ICX7250-48 Switch#show version Copyright (c) Ruckus Networks, Inc. All rights reserved.    UNIT 1: compiled on Jan

Question

 • Switches

118

3

0