T

1 Message

 • 

70 Points

Sat, Apr 10, 2021 6:32 PM

Unleashed mgmt-acl & LACP

Hi,

 

First time trying Ruckus and got 3x R710s on Unleashed 200.9.10.4.233.

Looking for two things in cli but not finding.  Unsupported?

1) Mgmt-acl - https://docs.commscope.com/bundle/unleashed-200.9-commandref/page/GUID-4D9DBEAA-A3A9-43E3-BE31-3DA01E8DA316.html

On config-sys context I don’t have mgmt.-acl.  Only mgmt.-if

ruckus(config-sys)# mgmt-acl macl1
The command is either unrecognized or incomplete. 

How to set management ACL on unleased? 

2) I believe LACP may not be fully supported on R710 unleased but running into blocked KBs when searching.

https://forums.ruckuswireless.com/conversations/ruckus-indoor-aps/r710-lacp-and-200810/5f91c3f1135b77e2478f4025

 

I did find LACP procedures here but not finding xmit-hash or lacp-rate? 

https://forums.ruckuswireless.com/conversations/ruckus-indoor-aps/lacp-on-r710/5f91c3f3135b77e2478f6310

ruckus(ap-mode)# get bond

LACP/Bonding is ENABLED.

<bond0>

        Mode:           8023AD

        LACP-rate:      slow

        MII-Mon:        100 (ms)

        Xmit-Hash:      layer2+3

        Slaves:         2

        Slave-0:        eth0, ACTIVE, UP, link-fail-count: 0

        Slave-1:        eth1, BACKUP, UP, link-fail-count: 0

OK

Thank you.

Responses

Official Rep

 • 

971 Messages

 • 

14K Points

1 m ago

Hi Taylor,

Mgmt ACL and LACP both are not supported on Unleashed at present.

LACP will be supported in upcoming 200.10 version so wait for it. Tentative release date is mid May.

Regards,

Syamantak Omer

Important Announcement