Documentation Downloads Knowledge How-To Hub Forums Cases Assets Warranty
Skip to main content
sander_groen's profile
sander_groen
500 Points

49 Messages

 • 

690 Points

Wed, Mar 10, 2021 12:42 PM

Unleashed 200.9.10.4.233 firmware

Hi all,

I see that unleashed firmware 200.9.10.4.233 has been released if you look on the master AP via the browser. I don't yet see it on the site hence there are no release notes available yet. I succesfully upgraded my 3 ap's (2 x R710 and 1 x R610) to unleashed 200.9.10.4.233 however 2 AP's (except the master) were having reboot loops. They come online and shortly after they were rebooting again. I flashed back to version 200.9.10.4.212. Was the release of 200.9.10.4.233 premature?

Thanks!

Question

 • 

Updated 

2 d ago

811

25

Responses

george_wang_cdzxmpno2ppvy

11 Messages

 • 

206 Points

1 m ago

Well, after upgrading my R610 AP to firmware 200.9.10.4.233, the mobile app suddenly have problem to connect to AP, it's weird .... 

1

0

george_wang_cdzxmpno2ppvy

11 Messages

 • 

206 Points

After investigating the reason that mobile App can't connect to my AP is due to some 3rd party DNS blacklist applying that block "commscope.pubnubapi.com", sorry my issue is not related to the latest Unleashed firmware.

P.S: I don't have "reboot" issue after applying 200.9.10.4.233 firmware almost 24 hours now.

Like

1 m ago

0

veno77

47 Messages

 • 

776 Points

1 m ago

@Ruckus guys, any link to the Release Notes?

@tony_heung ?

1

0

velosol

7 Messages

 • 

136 Points

@veno77 https://support.ruckuswireless.com/documents/3625-ruckus-unleashed-200-9-ga-refresh2-release-notes

Edit: somehow missed this in the reply below but leaving this here so it's at the top.

(edited)

Like

1 m ago

0

joseph_nguyen_gdm3zmg9y64pn

41 Messages

 • 

486 Points

1 m ago

i was using 200.8 on my AP unleashed R610s.  Upgraded to 200.9.xxx.212 I believe. It cut down my speed by 40%.  Went back to 200.8, my WiFi speed is back to near 600Mbps.  Definitely 200.9 is buggy and not backward compatible to the old backup configuration. Must create a new config and manually re-tuned your system for speed optimization. WTF!!!!

4

0

veno77

47 Messages

 • 

776 Points

@joseph_nguyen_gdm3zmg9y64pn this is totally off topic!

Like

1 m ago

0

joseph_nguyen_gdm3zmg9y64pn

41 Messages

 • 

486 Points

@veno77

How is it off topic? its related to 200.9 firmware release? Its another buggy symptom of 200.9 release.  Its definitely related to the main topic.  Who are you to decide its off  topic?

Like

1 m ago

0

veno77

47 Messages

 • 

776 Points

@joseph_nguyen_gdm3zmg9y64pn  the topic is specifically about 200.9.10.4.233 firmware, which is released to public 2 days ago. If you have problems with older 200.9 releases there are multiple topics in the forum. Posting about problems with older releases mixes with the main problems introduced with the current latest release!

(edited)

Like

1 m ago

0

joseph_nguyen_gdm3zmg9y64pn

41 Messages

 • 

486 Points

Why don't they just do a better job in testing before releases.  We wasted endless hours, we dont work for Ruckus.  Do a better job of testing and QA before releasing.  We are not your QAs.  This is horrible.  Shouldn't have ten versions of 200.9 period.  Lame... Poor product.  

200.9 vs. 200.8. Should i care about every line of code that changes, and every decimal thousandth places of versions? NO!  

Like

1 m ago

mlopaci

5 Messages

 • 

118 Points

1 m ago

This is an unstable version. System reboots every few hours.

 joins with uptime [89] s and last disconnected reason [AP Restart : kernel panic]

0

0

syamantak_omer

Official Rep

 • 

885 Messages

 • 

13K Points

1 m ago

Hi All,

Sorry for the inconvenience, our tech publication team is working on this.

Release notes and manual firmware download links will be available soon in the support forum.

Regards,

Syamantak Omer

0

0

syamantak_omer

Official Rep

 • 

885 Messages

 • 

13K Points

1 m ago

Hi All,

Release note is available on support portal.

Refer below link for release notes.

https://support.ruckuswireless.com/documents/3625-ruckus-unleashed-200-9-ga-refresh2-release-notes/download

If you are facing any issues with new version, please report it to support by opening a support case.

(edited)

Regards,

Syamantak Omer

3

0

veno77

47 Messages

 • 

776 Points

Thank you, @syamantak_omer . Unfortunately I did not see any enhancements for the R550 poor coverage issue I am facing as it was stated in another topic will come with 200.9 patch and also with 200.10 release...

Like

1 m ago

0

syamantak_omer

Official Rep

 • 

885 Messages

 • 

13K Points

Hi Veno,

Please wait for 200.10.

I think those enhancements are added to 200.10 version.

Regards,

Syamantak Omer

Like

1 m ago

sander_groen

49 Messages

 • 

690 Points

Hi @syamantak_omer any timeline when the 200.10 version will be out? Thanks.

Like

1 m ago

0

jason_sparrow

98 Messages

 • 

1.3K Points

1 m ago

I was having throughput issues and phones dropping connection. Back on 212 and all ok so far.

(edited)

0

0

aaron_uren

1 Message

 • 

60 Points

1 m ago

Thanks for posting this! I thought I was going crazy as my Ruckus AP has always been really stable for me.

I upgraded to 200.9.10.4.233 this evening, and my r610 instantly started boot looping as clients connected to it. As soon as I brought up another AP and transitioned the clients over, I could bring up the AP long enough to revert to 200.9.10.4.212 which resolved the issue.

I'd recommend that this release gets pulled before more people upgrade into a boot loop.

1

yon_belew

2 Messages

 • 

70 Points

That's some troubling news, I'm glad I didn't upgrade. Any official word from ruckus regarding the mess up?

Like

1 m ago

0

chris_weaven

1 Message

 • 

60 Points

1 m ago

Upgraded a r510 and AP kept rebooting with kernel panic, so rolled back & stable again. 

9

0

stuart_krivis

3 Messages

 • 

82 Points

I have an r510 too and I'm not having any problems with 200.9.10.4.233 - knock on wood. It looks like I've been using it for 2 days and 16 hours so far.

Like

1 m ago

0

george_wang_cdzxmpno2ppvy

11 Messages

 • 

206 Points

My R610 is also working fine after upgrading 200.9.10.4.233, uptime is now 2 days and 6 hours and counting.

Like

1 m ago

0

veno77

47 Messages

 • 

776 Points

do you have more devices in the Unleashed network, or only one AP?

Like

1 m ago

0

sander_groen

49 Messages

 • 

690 Points

At the time I had 2 x R710 and 1 R610. Just upgraded today to 3 x R750. Not sure if I should try again?

(edited)

Like

1 m ago

0

george_wang_cdzxmpno2ppvy

11 Messages

 • 

206 Points

I only have one R610 in Unleashed network.

Like

1 m ago

0

emes

3 Messages

 • 

104 Points

1 m ago

I have 4xR510 and am not seeing reboots, but am seeing these errors (kernel/emerg, prob not) reported about 1200 times per minute.

[13230.458965] ol_rx_process_tags:rx_tatus 2 rx_desc[1]: 0xE2000003 FCS err, drop a false ekahaul frame addr2: b4:cf:00:a5:24:87

0

sander_groen

49 Messages

 • 

690 Points

1 m ago

Hi all, yesterday I upgraded my ap's to R750's. I used unleashed version 200.9.10.4.212. All was well. This morning I tried upgrading to unleashed version 200.9.10.4.233. After the upgrade I noticed again that my ap's where starting to reboot on occasion. The log files shows: Mar 14 11:48:15 unleashed syslog: eventd_to_syslog():AP[AP02@1c:3a:60:3b:e6:b0] warm boot successfully,last reboot reason [kernel panic]. I have saved the debug and log files if anyone is interested?

0

veno77

47 Messages

 • 

776 Points

1 m ago

Strange is that the 200.9.10.4.233 is still on the OTA server...

(edited)

0

0

l_b

1 Message

 • 

60 Points

1 m ago

I tried to upgrade my system with some R750/R720/R710 and R510.

The R750 and /510 were never able to dowload the new version and after looking it up in Ruckus download portal no .233 version was avalable. So I had to go back to 212. Why would they release something, then take it down from the download portal but still let the server run ???

0

0

chris_nicholson_7159398

31 Messages

 • 

522 Points

1 m ago

Just updated my single R550.

0

0

stephen_hall_60sdfu2kr3t7b

45 Messages

 • 

714 Points

1 m ago

Im glad i found this thread (and that sander_groen posted it!) , before attempting to upgrade some of our newer unleashed setups.  will wait/keep an eye on this thread before upgrading (from .202).

for those curious, the only info relevant to 200.9.10.4.233 from the change-log are these ive pasted below: (btw, to ruckus support: change logs should always be attached to a release before it is made public,  with no exceptions):

Resolved Issues in Build 200.9.10.4.233
• Resolved an issue where an Unleashed AP reboots due to memory leakage. [ER-9496]
• Resolved an issue where the client cannot ping the gateway. [ER-9426]

(edited)

0

0

Was this helpful?